All Products

This aftermarket panel is designed to replace a rotted inner sill, and includes a lower floor pan lip which allows the outer edge of the rusty floor to be cut away and replaced. Choose right- or left-hand side.

Inner sill panels for long-wheelbase classic Mini Van/Estate/Pickup models, Mk3-on. Includes mounting pads for carpet studs.

Inner sill for long wheelbase classic Mini Van/Estate/Pickup models. Includes mounting pads for carpet studs.

Lower valve spring locator, used only with dual valve springs. Ref: AEA403, AEA0403, CVB2.

Left-hand partial inner wing body panel for 1991-on/Mk5-on classic Minis fitted with electric fan until introduction of the front radiator.

Front section only of the left-side inner wing panel, for Mk1, Mk2, and Mk3 classic Minis. Ref: CZH3065, SBO0722, 0801281.

Front section only of the right side inner wing panel, for Mk1 and Mk2 classic Minis; reproduction. Ref: SBO0721, REPAN039.

Front section only of the right-side inner wing panel, for Mk3 and later classic Minis with fresh air ducting inside fender. Ref: CZH3064.

Left-hand front inner wing repair section with the radiator slats only, as used on 1959-1989 Minis saloons.

24-tooth input gear for A-series 4-synchro transmission. Ref: 22G849, 22G0849.

Retaining nut that secures the input gear to the first motion shaft on all classic Mini models. Ref: 2A3548.

Standard ratio input gear for 1979-on classic Mini or Metro A+ transmission. Ref: DAM2925.

Low-wattage (3W) push-in bulb for instrument illumination. Ref: GLB504, LLB504, GLB2132.

Black plastic instrument gauge mounting pod with chrome trim, for early classic Mini Cooper and Cooper S. Ref: 14A9815, 14A9815T.

Oval plastic gauge housing as found in all classic Minis with three center-mounted gauges. Mk2-on type, which is self-supporting and does not require the metal inner plate. Ref: 24A2702.

Single-gauge mounting pod. Black plastic, as used on 1969-1984 850cc and 998cc Minis. Ref: LGA7548.

Single-gauge mounting pod. ''Old English White'' plastic, as used on 1961-1967 classic Mini and Mini Cooper. Ref: ADA3741.

Instrument/gauge illumination socket and bulb; fits 1/2'' diameter installation tube. Sold each.

Instrument/gauge illumination socket and bulb. Fits 3/8'' diameter installation tube; bulb included. Sold each.

3.5'' long intake manifold for Weber 40 or 45DCOE. Allows for Weber carb installation without modifying your Mini's firewall.

Aluminum intake manifold kit for 45DCOE Weber. Developed for competition use, with 34.3mm ports at the cylinder head

Modern design cast-aluminum intake manifold for use with single HS4, HIF4/HIF38, HS6, HIF6/HIF44 SU carburetor on 1380cc and smaller classic Mini engines. Ref: C-AHT770, GMC3000.

No-nonsense, no-frills manifold for the 1-3/4'' S.U. HIF6 / HIF44 carburetor; geniune Maniflow. Ref: C-AHT781, C-AHT770M, C-AHT770.

Fabricated steel inlet manifolds for Weber carburetors; made by Maniflow and are specifically designed for right-hand drive installations.

Dome light in the correct style for 70's-80's Minis (before the late recessed type lamp), but will also fit Mk1 models. Ref: EAM1650.

White plastic replacement lens for EAM1650 courtesy lamp. Ref: 24G3389.

Original ''Art Deco''-style interior dome lamp lens for Mk1 and Mk2 classic Minis. Ref: 17H9971.

Aftermarket interior dome lamp as used on Classic Minis 1984-on. Ref: AFU4092.

Interior door cappings in burl walnut; for use on classic Minis with roll-up window doors. Ref: MSA0191.

Complete set of replacement all-chrome metal interior hardware for roll-up window U.K. Mk3 doors. Ref: MSA507.

Black plastic door handle with chrome bezel. Fits all roll-up window doors on UK classic Minis up to 1996. Ref: 34G2529, JPC8387PA.

Interior door latch assembly, as used on left-hand drive classic Minis. Ref: 24A2143, 24A2146.

Interior door latch assembly, as used on right-hand drive classic Minis. Ref: 24A2144, 24A2145.

Screw with special fine threads to secure the interior door latch to the door on Mk1-2 classic Mini models.

Sliding-glass window door interior panel set for the classic Mini Mk1 and Mk2 Riley Elf and Wolseley Hornet

Roll-up window door panel set for the classic Mini Mk3 Riley Elf and Wolseley Hornet

Metal ''P'' clip for attaching the upholstery panels in the cargo area of the classic Mini Estate wagon

19-piece kit from Newton Commercial includes all the panels you will require to trim your Mk1 classic Mini, both the Cooper model and the standard model.

19-piece kit includes all the panels needed to trim a Mk1 or Mk2 classic Mini fitted with a central round speedometer binnacle.

19-piece kit from Newton Commercial includes all panels required to trim your Mk2 classic Mini. Ref: TK3001.

13-piece kit from Newton Commercial includes all the panels you will require to trim your Mk3 classic Mini fitted with a central oval speedo binnacle.

This 9-piece interior trim panel kit includes door panels, rear quarter panels, rear pocket liners, wheel arch covers and a rear parcel shelf liner.

These quarter panels are from our Monte Carlo Range and suit all saloons from 1970 to 1996. Available in a range of colors.

Pair of interior upholstered door panels for 1970-96 classic Minis.

Pair of interior upholstered door panels for 1970-96 classic Minis; black only.

Interior rear quarter panel pair, as originally fitted to all U.K.-built Mk1 and Mk2 classic Mini Saloons and Coopers

This cable release bonnet lock kit that relocates control of access to the inside of the car for anti-theft safety. Ref: GS130273, FSE10020KIT.

Replacement caliper internal fluid channel seal for aftermarket 4-piston calipers. Sold each.