All Products

Top-tint laminated windshield that will fit all years of classic Mini (1959-2000), including Cooper, Van, Estate, and Pickup models. Ref: HT21GNBL/Z, 24A2236, 24A2236B.

Reproduction of the lamp bar used by the Works rally cars; fits classic Minis 1959-1996. Ref: MSA1101, C-AJJ3329B.

Steel mounting bracket for Wipac fog lamp S6078 or driving lamp S6007. Ref: XBU10045.

Lamp brackets for MPi classic Minis with four (4) front lamps, or for a car being retrofitted with original Rover lamps and brackets. Ref: XBU100640 XBU100650 XBU10044

Rubber seating gasket for under the metal license plate lamp housing as used on Mk3 and later classic Minis. Ref: 13H6010, 54571498.

Oversized, 6-1/2'' diameter driving lights for your classic Mini. These black plastic-backed lamps also fit single- and twin-point injected cars as replacements for the original Rover lamps.

Economical reverse lamp with integral mount; plastic body with clear lens and white reflector. Ref: MSA1116.

Replacement 3-synchro laygear, for use in stock helical-cut gearbox. Ref: 22G110.

Oversized layshaft bearing. Fits only Swiftune gear sets manufactured 2013 or later.

Unique-sized layshaft bearing to fit Quaife-manufactured dog-engagement gesarset.

Small metal plate that locks the layshaft in position in most Classic Mini gearboxes. Ref: 2A3581.

An improved layshaft featuring superior material specification and precision machining. Ref: C-22A1731, STF0011HD

Single-step layshaft for 4-synchro remote and early rod change transmission. Ref: STF0012, 22G931, 22G0931.

Single-step layshaft for four-synchro remote and early rod change transmission; made from a special grade of steel (EN36). Ref: C-22A1738, 22A1738.

Competition-quality A+ 3-step layshaft; precision-ground, fully heat-treated to exacting specifications.

An improved version of the 3-step A+ layshaft, using a superior material and tougher hardening. Ref: C-22A1739, DAM3187.

Standard-bore LCB collector for the C-AEG365 Maniflow LCB header. Ref: C-AHT197.

The long center branch (''LCB'') design has stood the test of time and is the best all-around exhaust manifold for the A-series engine. Ref: C-AEG365, SIE0030.

Large-bore LCB for race use or large bore street engines such as 1380cc+. Ref: C-AHT289, SIE0240.

Premium performance Maniflow LCB header with an enlarged and reshaped middle pipe. Ref: C-AEG376, LM004S11R, C-AEG365S2.

Stainless steel LCB exhaust header, made by Maniflow. Ref: C-AEG365S.

Original-type ''Downton/Special Tuning'' LCB header designed to fit classic Minis with rubber couplers or QL5000. Made by Maniflow. Ref: C-AEG362, LM004A.

Made in the UK by Maniflow. Same proven design as their other LCBs, but for 1990-on fuel-injected cars. Oxygen sensor bung fitted; mates to RC40 exhaust systems.

Black leather fastening straps that can be used for securing panels where a traditional look is required. Ref: MS121.

A very nice black leather key fob, with metal plate to affix self-adhesive logo badge. Ref: MSA2105.

Classic Minis built from about 1986 through 1996 used these front signal lenses and push-in side marker lamps.

Clear tail light lens kit; fits all classic Minis with the two-piece lens incorporating a back-up light. Ref: MSSK036.

Late classic Minis (1986-on) used a larger plastic lens on the front panel turn indicator lamps. These are amber as found in many sales markets.

Amber beehive-shaped front indicator lens as found on early classic Minis. Original glass material. Ref: 54581651, 37H5520.

Front indicator lens, in clear (''white'') glass, as found on early classic Minis. Ref: 54581622, 37H6928.

Late classic Minis (1986-on) used a larger plastic lens on the front panel turn indicator lamps. This lens is clear, often called ''white'', and is retained by screws, unlike earlier ''beehive'' lenses held in by a chrome ring.

Front turn signal and parking light lens for the classic Mini Clubman. Ref: BAU1796.

Clear lens with chrome ring for the front parking light and turn signal assembly, as used on the U.K. classic Mini Moke and MG1100 Sedan. Ref: 54570651.

Clear replacement lens for license plate lamp used on Mk1-2 classic Minis, including long-wheelbase models. Fits original Lucas lamps.

Replacement green lens at the end of the turn signal stalk on Mk1 classic Mini models. Ref: 47H5200, 54331222.

Lower, red portion of the the tail light lens for the Mini Van or Estate Wagon; used. Ref: 54581261, 37H4963.

Red glass beehive lens only, as used on rear of classic Mini Moke models. Ref: 576109, 37H5531.

Amber side marker/repeater lamp lens for the front fender, as used on classic Minis 1985-on. Ref: AHU2592, PRC9916A.

Clear side marker/repeater lamp lens for the front fender, as used on classic Minis 1986-on. Ref: AHU2592, AHU2592W.

Tail lamp lenses for Mk2 and Mk3 classic Minis, with red and amber lights, no backup light. Ref: 54580144, 54580145, 37H4838, 37H4837.

Lower (bottom) portion of the left tail light lens for Mk4 Mini. Red and white. Ref: 54590549, AAU9361, XFJ10029.

Lower (bottom) portion of the right tail light lens for Mk4 Mini. Red and white. Ref: 54590548, AAU9360, XFJ10028.

Upper (top) portion of the left tail light lens for Mk4 classic Minis. Red and amber. Ref: 54590545, AAU9359, XFJ10027.

Upper (top) portion of the right tail light lens for Mk4 Mini. Red and amber. Ref: 54590544, AAU9358, XFJ10026.

Sheet metal bracket as used on U.S.-market Mk1 classic Minis, to allow for the use of the license plate lamp with U.S. plates. Ref: 14A8300.

Chrome metal D-shaped lamp, as fitted to many classic Minis in the 1960s; reproduction. Ref: 56790, BHA4153.

Original-style classic Mini chrome rear license plate lamp assembly, made from Lucas tooling with Lucas glass lens. Ref: 56790, 127916 56790OE.

Reproduction of the 56790 rear number plate lamp as used on classic Mini Vans, Estates and Pickups. Ref: 53837, 53837E, 83H335.