All Products

Rocker hazard switch with six round pin connectors, fits Mk3 Canadian Minis. Ref: 13H8691, BHA5267.

Rocker hazard switch with six round pin connectors. Fits 1976-2000 classic Minis. Ref: YUF101660, 13H8200, 13H8691, YUF101000.

Special as-original tapered 5/16'' cylinder head bolt as was used on the water pump end of the Cooper S block.

Special tapered 5/16'' cylinder head bolt as used on the water pump end of the Cooper S block; heavy-duty aftermarket version. Ref: C-AHT281, AEG248, AEG0248HD.

Head gasket set for all classic Mini 1275cc engines; made in the U.K.

This gasket set fits all 1275cc-based engines and includes a copper-composite head gasket. Ref: AJM1141MS, CF463, SGK0014.

Eonomically-priced gasket set to fit ''small bore'' 850 to 1098cc engines; includes composite head gasket. Ref: SGK0011E, CCF070, CF070L, GEG101.

Head gasket set to fit ''small bore'' 850 to 1098cc engines; includes copper head gasket and o-ring-type valve stem seals. Ref: CF070, GUG701149HS, CF072, GEG101-COPPER.

Grey composite head gasket with steel fire rings for standard 1275/1300 engines. Ref: BK450, BK450R, SGK0004E.

Modern black BK450 head gasket with sealant coating; heat-activated shellac-type coating helps prevent leaks. Ref: TAM1521, SGK0004.

Composite head gasket for 1275cc or larger classic Minis, marked AF470. Ref: GUG702560HG, GUG812632HG.

Economical 1275/1300 copper head gasket; suitable for standard-spec 1275 and 1300 engines. Ref: GEG301, SGK0003, GEG0301.

A modern version of the long-obsolete C-AHT188 competition copper head gasket. Ref: GEG300, GEG0300.

Standard head gasket; suitable for most 1275cc engines. Ref: GEG301, CAF470, DBK450, MST208.

Economically-priced steel-backed head gasket for 850, 997, 998 and 1098 engines. Ref: GUG2506HG, SGK0002E.

Upgraded copper-composite head gasket for ''small-bore'' 850-1098cc engines. Ref: GUG702506HG, AF070, SGK0002.

High-compression gasket that was specially developed for 1275 Metros raced in England. Ref: SEN0466, C-STR1057.

Very complete ARP kit includes all of the head studs, plus rocker studs, parallel ground washers, and 12 point nuts. Ref: HSA11, 206-4204.

Complete set of ARP head and rocker studs for 9-stud A-series and A+ engines. Ref: 206-4201, HSA9, SEN0409, 2064201.

Complete 10-stud ARP head stud kit for 970, 1071 and 1275 Cooper S classic Minis. Ref: HSA11-B, 206-4204.

ARP head stud, 5.65''. Sold each.

ARP head stud, 4.25''. Sold each.

Headlamp adjuster screw kit includes screws, plastic nuts, and tension spring. Ref: 60600427, MS14K, BHM7058.

Complete headlamp assembly, including a Wagner sealed beam headlamp bulb suitable for left-hand drive. Ref: BHM7198E, 59191, BHM7198, 27H8207, 60713.

''Quadoptic'' H4 halogen headlights with European pilot light, with chip-resistant lenses that deliver a wide, flat beam. Ref: S4699B, WIS4699B.

Pair of left-hand drive ''quadoptic'' H4 haolgen headlights. Ref: S4695B.

Pair of right-hand drive ''quadoptic'' H4 haolgen headlights. Ref: S4698B, WIS4698B.

Stainless steel headlamp ring, includes retaining screw; no drain holes. Ref: 500929, 500929MS, 54520650.

Premium chrome over stainless steel headlamp bezel. Made in the U.K. by Wipac. Ref: S5435, WIS5435, 500929W, DHF100060.

Metal bowl that supports the headlamp bulb itself. Ref: 27H6481, 54528191.

Original-style metal headlamp bucket; fits all except self-levelling headlamps. Ref: 54522342, MS14, HLB001.

Plastic headlamp bucket assembly for 7'' round lamps, includes retainer, seal, and hardware. Ref: S5400.

Replacement H4 Halogen bulb for Wipac Quadoptic headlamps.

Pair of clear plastic covers to protect your headlights; fit underneath and are retained by the original bezel with no additional fasteners. Ref: P1015, SAC0069.

7'' Lucas-style headlamp mounting ring repair panel piece, ideal for rust repair. Ref: 14A6693.

Original-style body panel that holds the classic Mini Clubman headlamp assembly. Ref: CZH120, CZH121.

Aftermarket body panel that holds the classic Mini Clubman headlamp assembly. Ref: MS56R, MS56L, CZH120, CZH121.

Stainless steel trim pieces fit over headlamps, below the lamp retaining ring. A very charming and period accessory! Ref: 8B12399, GE915.

Wiring harness with plug to accept conventional 3-prong headlight plug. Correct color wires to plug into your wiring harness. Ref: 54947172, BAU2110.

Wiring harness with plug to accept conventional 3-prong headlight plug. Includes secondary lamp socket with wiring for use with pilot light

Metal inner rim that retains the headlamp bulb in the inner bucket; 18mm deep. Ref: 54521913, 515218A.

Metal inner rim that retains the headlamp bulb to the inner bucket; as used on classic Minis 1996-2000.

This plug and small harness facilitates repair of 1976-on headlamp switches with three (3) round pin connections. Ref: PM07.

Original-style bat-handle two-position toggle switch for headlamps in Mk1 and Mk2 classic Minis. Ref: 1H9077, 31788, BCA4294.

Sealed beam Halogen headlamp, DOT approved, for driving on on the right-hand side of the road. Ref: H6024.

Wipac-style quadoptic headlamp, as fitted to 1990s MPi (multi-point fuel injection) right-hand drive classic Mini models with self-levelling units. Ref: XBC104430.

Heavy-duty chrome-plated wire mesh stone guard set; fits 7'' headlights. Ref: SAC0136, STONEGUARD.

This original set of headlining stays are suitable for all classic Mini saloons (sedans) built after 1970. The color-coded stays are inserted through hoops in the headlining kits. Instructions included.