All Products

Extra-length braided strap looks original but allows more flexibility with mounting locations. Ref: 5L1137, CMB115, 2K8617.

Metal guide on top of the bonnet crossmember of the front panel; fits all through 1996. Not for MPi models with FPS100340 latch.

Small metal guide that retains the spring-loaded or ''swinging'' needle on SU HS or HIF carburetors. Ref: AUD4288.

Full-length half floor section for the Mk1, Mk2, and Mk3 classic Mini Saloon (sedan). Inner sill included and 4-vent outer sill is welded in place.

Half-floor made for 1990s fuel-injected classic Minis until the end of production. Heritage. Ref: HMP441004, HMP441005, HMP441004/HTG, HMP441005/HTG.

Full-length half floor with inner and outer sills. Ideal panel for extensive rust repair of Mk3 and later (pre-fuel injection) Saloons with 6-vent outer sills. Aftermarket; ships via UPS. Choose right- or left-hand side.

Accurate reproduction classic Mini half-floor body panel, full-length with inner sill only. Ref: FS006L, FS006R.

Aftermarket full-length half floor sections for the long-wheelbase Mk1/Mk2 classic Van, Estate, and Pickup models.

Full-length half floor section for the Mk3-on classic Mini Van, Estate, and Pickup models, with inner sill. Ref: MSP012R, MSP012L, SBO0126, SBO0127.

This leather handbrake boot will suit all classic Mini models; attaches to the carpet with Velcro stitched to the underside. Special order, lead time may be required.

Vinyl handbrake boot to over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Vinyl handbrake boot fits over the handbrake lever in any Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Vinyl handbrake boot fits over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure.

Locks the adjustment nut on the forward cable of 1976-on classic Minis with single-cable systems. Ref: 31G5049.

Classic Minis to 1976 used two cables from the lever to the rear; two (2) of these springs are used at the adjustment end of the cables. Ref: ACH8508.

Left-hand side sheet metal bracket on the rear backing plate to align the handbrake cable. Ref: 21A1670.

Right-hand side sheet metal bracket on the rear backplate to align the handbrake cable. Ref: 21A1669.

All classic Minis use this clevis pin to attach the rear of the handbrake cables to the actuating levers on the brake backing plates. Ref: CLZ409, CLZ0409.

This part connects the single front and rear cables together on all 1976-2000 classic Minis.

Small metal guide plate holds the sealing pad to keep dirt and water from entering the car where the cable(s) pass through the floor. Ref: ACA5522.

Small rubber seal fits under the cable guide plate to seal dirt and water from entering the cable hole(s). Ref: 21A385, SPK10002.

This cable runs from rear wheel to rear wheel and passes through the compensator on 1976-on classic Minis

Classic Mini Moke handbrake cable for Australian model with 13'' wheels. Ref: AYK5786, 21A1391A.

The crrect handbrake cable for UK and Australian classic Mini Mokes with 10'' wheels. Ref: BHM9665, 21A1391.

Beginning in 1976, the classic Mini used this single cable from the handbrake lever to the rear cable equalizer. Ref: GVC2135, GVC1035, BC849, FAM849.

Dry (non-Hydrolastic) classic Mini Saloons (sedans) and Mokes to 1976 used two handbrake cables. Sold each.

The hydroelastic classic Mini Saloon (sedan) used the shortest handbrake cable of the three lengths fitted to the classic Mini.

Front cable as used in long-wheelbase single-cable classic Mini variants from 1976-on

Handbrake cable for the extra-long wheelbase classic Mini Van, Estate, and Pickup. Ref: GVC1020, 21A1706, BC412, MBC412.

Classic Mini handbrake grip in glossy burl walnut. Ref: MSA0195.

This thick grip is a very nice upgrade to the stock handbrake lever and was used on many of the upgraded Minis of the 80s-90s. Ref: FAM8356, NAM9563.

Rubber grip that makes grasping the handbrake lever a little nicer on a cold day. Ref: 13H5541.

This hasp connects the front of the forward cable to the handbrake lever.

Center rod though the handbrake lever, as used on two-cable systems up to 1976. New Old Stock.

Pair of left and right handbrake operating levers on the rear brake backplates; fits classic Minis 1959-2000

Coiled handbrake return spring for original design KAD rear disc brakes. Different left and right; sold per pair.

Door and boot handles as used on classic Mini Saloons from 1966-1969, and on U.K. Van, Estate, and Pickup until the end of production. Ref: 24A2083KIT, 24A2083.

Kit for the early classic Mini Mk1 door handle design; includes door handles plus t-handle boot handle with matching keys. Ref: 24A1140KIT, 24A1140.

A handy kit of nuts, bolts and heavy washers to install a rear subframe into a 1976-2000 classic Mini.

These flanges are used to convert from pot joint output shafts to Hardy Spicer flange type, snapping in place just like the inner CV joints, and fit the smaller, standard diff side covers.

Superior race-quality bolts for the Hardy-Spicer differential output flange. A track-tested product! Sold per set/8.

By Lindsay Porter. Covers the restoration of most bodywork and mechanical components of all Minis from 1959-2000 including Mini Cooper, information on interior trim and electrics of most versions. Catalytic

From basic maintenance to a complete overhaul, this book covers it. For all classic Minis produced from 1969 through the end of the line in 2001. Keep your Mini in

Get to know your classic Mk1 and Mk2 classic Mini a little better, with clear, step-by-step illustrated instructions the cover the dismantling, inspection, repair and refitting of the entire car.

HAYNES TECHBOOK for Weber, SU, and Zenith Stromberg carburetors. Written for the do-it-yourselfer, good enough for the pro. Covers: Theory and operation Maintenance and tune-up Detailed

Flasher for hazard lights on some classic Mini models. Two (2) terminals.

Flasher relay for hazard lights on classic Mini models up to 1993. Two (2) spade terminals.

This plug and wiring connector kit facilitates repair of 1976-on hazard rocker switch with six (6) round pin connections