All Products

Non-standard side-exit push-in distributor cap for Lucas 45D distributors. Ref: DDB194, 54400270, DC94, GDC142, NJD000142EVA.

Rubber waterproofing boot for the early, side exit distributor cap as used on 25D distributors found on the classic Mini 1959-1973. Ref: 8G726, 8G0726.

Drive spindle for A+ distributors only. Ref: 12G3560.

Drive spindle that fits distributors on A+ engines only. Used. Ref: 12G3560, U-12G3560, 12G3560-USED.

Good-condition used distributor drive spindle/gear for A-series engines only. Ref: 12G4499, U-12G4499, 12G4499-USED.

This is the later A+ distributor retainer, introduced with the ''black box'' electronic distributor. Ref: TAM1671.

A nice laser-cut stainless steel hold-down clamp for points-type A+ distributors, with graduated markings for advanced calibration.

Replacement clamp for all distributors used on A-series (not A+) classic Mini engines. Ref: 3H2138, 501134, 421191.

Used distributor mounting base/adapter; slides into A-series 850cc, 997cc, 998cc, 1098c or 1275cc blocks. Ref: 12A1136, U-12A1136, 12A1136-USED

59D points-type distributor for 1275 A+ engine, including Metro. Complete assembly including cap, rotor, points and condenser. Ref: ADU3825.

23D mechanical advance A-series distributor, fitted with a top-exit cap. Ref: 12G2140.

A brand-new distributor with the looks of the Lucas 25D distributor, but with maintenance-free electronic ignition. Ref: GEU930MS, 25D4E.

Modern Japanese electronics have been combined with the Lucas 45D4 Distributor to give you the best of both worlds, maintenance-free ignition with the original look of your British Distributor. Ref: 41427, 41427E, 45D4E.

59D points-type distributor for A+ 998cc, 1981-1989. Ref: ADU5789, AAU9142, 59D4.

Used Lucas 59D series points distributor for A+ blocks. With vacuum advance unit.

A+ Distributor with electronic ignition; evolution curve to give best performance on classic Minis with standard camshaft up to to 276 spec. Ref: C-27H7701.

Advanced electronic distributor for your A+ classic Mini. Ref: 59D4E, ADU3825MS.

A+ distributor with electronic ignition; evolution curve to give best performance on classic Minis with 286-296 performance camshaft. Ref: C-27H7702.

Distributor for race or high-performance classic Mini A+ engines; points can be either red- or blue-type. Ref: ALDONRPLUS, SEL0109, 100ARP.

Aldon Yellow non-vacuum advance distributor for A+ for performance street application.

Aldon Yellow distributor A-Plus with vacuum advance. Custom ignition curve for performance street application. Built on new distributor body for accuracy and long life.

Aldon Yellow distributor for tuned road engines. Fits pre-A+ engines only; mechanical advance only in this unit.

Lucas-style 25D distributor with vacuum advance for pre-A+ motors, with an adjustment screw for fine tuning the timing. Ref: GEU930, 41403, ULT0141V.

This bracket welds onto the firewall and is the fastening point for the flywheel-end engine stablizer ''dog-bone''. Made in the U.K.

Stainless steel dogbone mount repair bracket. Ref: 14A6730, 14A6730E, FOR075.

Set includes both roll-up window door exterior handles and boot handle with matching locks/keys, for Mk3-on classic Minis. Ref: CZH1785.

Set of three matching lock barrels for both door handles and the boot handle on any Mk3-on (roll-up) window car. Includes two keys.

Nylon door wedge buffer, to fit all sliding-window doors.

Individual door bar to complete Safety Devices roll cage assembly. This helps tie the front section to the main hoop, and provides side impact protection. Sold each.

Convex-glass bullet-style door mirror designed specifically for the classic Mini and will give the correct viewing angle for safety. Ref: GAM107C, GAM108C.

Glat-glass bullet-style door mirror designed specifically for the classic Mini and will give the correct viewing angle for safety. Ref: GAM107, GAM108.

Moisture barrier/membrane for Mk1 and Mk2 classic Mini interior door panels. This is an aftermarket part that is based on principles used on expensive-car restorations.

Moisture barrier/membrane for Mk3-on classic Mini interior door panels, with precision-cut holes for door locks, window winders, door handles, and speaker holes

Rubber seal for door check after 1986; choose right- or left-hand side.

Specially-shaped seal keeps water out of the check arm opening. Left-hand side. Ref: CZH4053.

Specially-shaped seal keeps water out of the door check arm opening; right-hand side. Ref: CZH4052.

Check arm with stop to prevent the classic Mini roll-up window door from swinging too far open. Fits either side. Ref: ADA5671, CLZ412.

S-shaped metal bracket mounts on the hinge panel where the strap passes over the door seal. Ref: 14A6745.

Stamped metal finisher with recesses for door strap screws; use one on each end of the strap, 4 per car. Ref: 14A764, 14A0764.

Metal bracket on the door to affix the restraint strap. Ref: 14A6744.

Check straps to prevent the doors from swinging too far, for Mk1-2 classic Mini models.

One of the quaint features of the Mk1-2 Mini models was the door check straps to prevent the doors from swinging too far.

This simple trim was originally fitted the the inside lip of the Mk1 and Mk2 doors, just below the windows and above the interior door handle. Ref: 24A1517.

These fillet panels slot into the space at the front and back of the door panels on Mk1 and Mk2 classic Minis, holding the door panel into the door frame. Ref: DP3022, Newton Commercial.

Fillet panels that slot into the space at the front and back of the door panels on Mk1 and Mk2 classic Minis, holding the door panel into the door frame. Ref: DP3022A, DP3022.

These panels hold the interior door panel in place against the external door skin by bearing against the internal door frame. A pair of fillet panels will fit one door, one at the front of the pocket and one at the rear, so two pairs will be needed for a complete car set.

Repair patch for the bottom structure of sliding window door; aftermarket. Ref: MSP002L, MSP002R, REPAN037, REPAN038.

This panel replaces the bottom 3.5'' of the inner frame of the door, plus the bottom lip. Fits roll-up window doors only. Ref: MS34R, MS34L.