All Products

Replacement door frame surround panel for roll-up window classic Minis only. Ref: CZH122/HTG, CZH123/HTG, CZH122, CZH123.

OEM-spec metal channel that supports the roll-up window glass and connects it to the arm of the window regulator. Ref: ALA5746, ALA5747.

A pair of channels to support the door glass in Mk3 and later classic Minis; includes rubber seals. Ref: MSSK2105, 24A948, ALA5746, ALA5747.

A pair of channels to support the door glass in Mk3 and later classic Minis. Ref: ALA5746, ALA5747, MSSK2105.

Clear window glass for roll-up window doors on U.K. classic Minis 1970-2000; fits either side. Ref: ALA5723.

Door window glass pane in pale green tint. Fits UK classic Minis with roll-up windows, 1970-2000.

Small gasket for leading end of exterior door handle of roll-up window cars. Ref: CZH1729, ALA5795.

Gasket between rear of door handle and exterior door skin. Ref: ALA5795.

Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle.

Interior door handle for Mk1-2 classic Minis; replaces cable opener for early models and provides an easy-to-use lever for door release. Ref: GLZ119, GLZ119A.

Thick metal backing plate to support the studs of Mk3-on classic Mini door hinges. Ref: ALA6381.

Set of metric stainless steel bolts, studs and washers to fit the aftermarket replacement hinges only. Ref: 14A6818BOLT, SBO0035.

Complete alloy hinge set that includes all four (4) hinges and the hardware to mount them. Ref: 14A6818K, SBO0034.

Aluminum reproduction door hinges that replace the original steel or brass versions. Ref: 14A6818, 14A6819, 14A6820, 14A6821.

Stamped aluminum trim to protect the front end of the Mk1-2 classic Mini door pocket. Ref: 14A7176, 14A7177.

Main door lock assembly for classic Minis with roll-up windows only. Ref: CZH3528, CZH3529.

Felt pad/gasket that sits between the door lock and door on external hinge classic Mini doors

A replacement Mk3-on classic Mini door lever in polished metal to upgrade the interior from the standard plastic version. Ref: G283.

This is the switch that fitted into the A post to turn the interior light on and off. Ref: YUE10003, YUE100470, 13H9481.

If you need to replace the locks in an original Mk1-Mk2 classic Mini, this set includes a pair of barrels and keys.

Rectangular black plastic finisher that surrounds the door lock toggle. Ref: CZH611, CZH611PA.

Lock control with link for roll-up window doors, as fitted to 1993-on classic Minis; can retrofit all roll-up window doors on U.K. Minis.

Stainless steel door-mounted dome-design mirror that fits all classic Minis, 1980-on. Ref: GAM112, GAM113, MDM1, MDM2.

Low-cost reproduction of the original-type black plastic mirrors fitted as standard from 1980. Ref: JPC8396, JPC8397, JPC9848MS, JPC9848, JPC9849MS, JPC9849.

Reproduction of the original-type white plastic mirrors with black mounts fitted from 1980. Ref: CRB10184MS, CRB10184NAL, CRB10184, CRB10185MS, CRB10185NAL, CRB10185.

Reproduction of the original-type ''Old English White'' plastic mirrors with black mounts fitted as standard from 1980. Ref: GS25320.

Low-cost reproduction of the original-type black plastic mirrors fitted as standard from 1980. Ref: GS25319.

These large rectangular convex glass ''flag'' mirrors gives excellent rear vision for maximum safety. Ref: GAM217, GAM218, GAM217A, GAM218A, M68890, M68891.

The large size and rectangular shape of these flat glass ''flag'' mirrors gives excellent rear vision for maximum safety. Ref: GAM215A, GAM216A, GAM258, GAM259.

A replica of the round door mirrors used in the 1960s; mounts with two external screws into the sheet metal. Ref: SAC0096, GAM1001.

Pair of interior door opening handles in burl walnut. Ref: MSA0193.

Pair of door opening links for roll-up window Innocenti classic Mini. Used condition.

This is the u-shaped metal receiver on the b-post that accepts the nylon alignment buffer when the door is closed.

Stair-stepped striker on the b-post that receives the tongue of the door latch when the door is closed. Ref: 14A6832, 14A6832MS.

A curved metal molding finishes the top edge of the Mk1 and Mk2 classic Mini door pocket. Ref: 24A1169.

Pair of front door pocket liners, covered in a colored material to match the rest of the interior trim, unlike the U.K. models which were originally a painted board only

Door pocket liners made from high-quality painted and embossed automotive-quality fiberboard. Ref: DP3023, DP3023A.

Handy plastic door bin that screws to bottom of the roll-up window door. Fits classic Minis 1970-2000 (excluding Innocenti). Ref: YGA452, YGA0452.

Pair of interior door pull handles in burl walnut. Ref: MSA0192.

Plastic door pull as fitted to early roll-up window cars. Includes chrome metal brackets at each end. Sold as an assembly, two required per car.

High-quality, polished aluminum alloy door pull handles; much stronger than the original plastic ones. Ref: MSA1132.

Black solid rubber u-channel door seal, with hollow foam seal section, as origial for early classic Minis. Ref: XGA9934.

Black rubber, bulb-type seal to fit the small door gap of classic Mini sliding-window doors. Ref: XGA9934, XGA9934V.

Modern bulb seal design with vinyl-covered u-channel to fit the door opening flange on all internal-hinge classic Minis. Ref: CGA2835, CGA2835MS, CFB10047.

This patch panel can be used for rust repair in the lower outer skin of the Mk3 classic Mini door. Aftermarket.

Lower section of outer skin of the classic Mini Van/Estate rear door; includes the lower edge of the window. Ref: 14A8096/SKIN, 14A8097/SKIN.

Outer door skin (only) panels for Mk1 and Mk2 classic Minis with sliding windows; reproduction. Ref: MS12R, MS12L.

Reproduction aluminum door skin; lightweight for racing applications. Ref: 14A5498AL, 14A5499AL, MS12AR, MS12AL.