All Products

Original AE liner as used by BMC/Rover to restore worn or damaged block; fits cylinders in all 1275cc motors. Ref: AEG428, SU3598, AEG0428.

Black plastic screw top with damper/plunger for the U.S. HIF carburetor. Ref: LZX1511, LZX1505, LZX1505A, CUD2904.

Fiber washer used under the damper cap on SU HS carburetors. Ref: AUC4900, GSU0560.

Minis from Mk2-on use this padded lower dash rail, which moves the switches closer to the driver's reach, and prevents barking your shins against the dash. Ref: ALA6621.

Mk3-on weld-in lower parcel shelf metal panel with hole for switch panel; fits between the A posts. Ref: BMP201.

Steel upper dash rail with center hole for ash tray. Has holes near the end to accept the padded upper dash, as used from 1984. Ref: 14A6675.

A roll of vinyl with sufficient material to do upper and lower dash rails and A-posts as was used originally on Deluxe and Cooper models of the Mini.

Black roll of leather-look vinyl with sufficient material to do upper and lower dash rails and A-posts as was used originally on Deluxe and Cooper models of the classic Mini.

Under-dash tray liner support panel for classic Minis 1970-on. Ref: DT3076, newton commercial.

Dash liner made from heavy-duty PVC with a felt backing; as commonly found on the classic Mini Van and Pickup

Liner fits in the dash tray, and is held in place by the speedo panels. Made of vinyl to match the interior trim color, and has a foam backing as original

Pair of speedometer trim panels to fit classic Mk1 Minis with the three instrument speedo binnacle set into the dash

Pair of dashboard trim panels that fit on either side of the speedometer. For 1962-1970 classic Minis fitted with the round binnacle with only the speedometer in the center of the dash.

Pair of black dashboard trim panels that fit on either side of the speedometer. For 1962-1970 Minis fitted with the round binnacle with only the speedometer in the center of the dash.

Pair of dashboard trim panels that fit on either side of the speedometer, for 1970-1976 classic Minis fitted with the oval binnacl. Ref: DT3026.

Pair of dashboard trim panels that fit on either side of the speedometer, for 1970-1976 classic Minis fitted with the oval binnacle. Ref: DT3026, DT3026A.

Pair of dashboard trim panels for late Mk3 and all Mk4 classic Minis fitted with the oval binnacle with three gauges in the center. Ref: DT3038.

Universal set of lining panels to fit two-clock or three-clock instrument clusters, consisting of one large panel to fill the majority of the dash area, and a smaller one to fill the gap between the binnacle and the A-pillar.

Custom brushed alloy dashboard for right-hand drive classic Minis with two-gauge instrument pod in front of driver. Ref: DASH015.

Burl walnut dashboard for right hand drive 1984-on classic Minis; installs over existing 2-gauge cluster in front of driver. Ref: DASH003.

Burl walnut dashboard for left-hand drive, 1984-on classic Minis; installs over existing 3-gauge cluster. Ref: DASH008, PMY471A.

Burl walnut dashboard for right-hand drive 1984-on classic Minis; installs over existing 3-gauge cluster. Ref: DASH006, PMY470.

Burl walnut dashboard for left-hand drive 1984-on classic Minis. High-gloss finish. Installs over existing 3-gauge cluster in front of driver, and has removable portion for installation of radio.

Burl walnut dashboard for right-hand drive 1984-on classic Minis. Ref: DASH005.

Burl walnut dashboard for left-hand drive twin- or multi-point fuel injection (MPi) classic Minis 1997-on. Ref: DASH014.

Burl walnut dashboard for right-hand drive twin- or multi-point fuel injection (MPi) classic Minis 1997-on. Ref: DASH013.

Retro-look burl walnut dashboard to fit 1984-on classic Minis equipped with upper and lower dash pad. Ref: PMY474, DASH001.

Pair of period-correct works-type rally dash panels to fit a center-binnacle Mini. Finished in black crinkle finish. Ref: C-AJJ3330, C-AJJ3331.

Feature-filled high-def dashcam with 2.7'' touchscreen and front and rear cameras, ideal for any vehicle!

Dashpot damper with black plastic cap. Fits the top of SU HS2 and HS4 carburetors. Ref: AUC8103, AUC8114A, GSU0322.

Dashpot spring with 2.5 ounce rate at 2.625'' length; commonly found on performance-tuned engines.

Small-diameter dashpot spring with 4.5 ounce rate at 2.635'' length. Commonly found on stock spec units and mildly tuned engines. Ref: AUC4387.

SU dashpot spring with 8oz ounce rate. 1'' diameter, as used on HS and early HIF-series carbs. Ref: AUC1167.

Large-diameter red spring as used in most HIF carbs. 4.5 ounce spring rate. Ref: AUD4355.

Large-diameter yellow spring as used in most HIF carbs. 8 ounce spring rate. Ref: AUD4398.

30th anniversary decal kit for red ''Mini Thirty'' models. Kit includes rear quarter decals, boot lid decal, and coordinating pinstripes. Ref: MSSK2202, DAF10235RYV.

Decal text ''ACTUAL SIZE'' in white, permanent-adhesive vinyl. 6.5''x1''. Ref: NMA1120.

Decal text ''FUN-SIZED'' in white, permanent-adhesive vinyl. 6.5''x1''. Ref: NMA1121.

Exterior-grade vinyl self-adhesive label/decal. British Leyland logo over ''Special Tuning Abingdon''. Dark green on white. Ref: ST153, LMG1050.

BMC Rosette decal, approx. 3.5'' wide. Apply to inside of window or windscreen. Ref: TR204, LMG1062.

BMC Rosette water-transfer decal, approx. 3.5'' wide. Apply to outside of window.

BMC ''Special Tuning'' rosette window water-transfer decal. Approx. 3.5" wide.

Restoration-quality sticker as used on the front edge of the twin carb air filter case, for the classic Mini Cooper and Cooper S. Ref: ST120, LMG1014.

Metallic decal, ''Lucas HA12 Coil''. Ref: SMI0176, CRST156, LMG1091.

The latest model Sportspack Mini Coopers have a similar 4" diameter decal on the bodyside. Ref: MSA1127, MSA1128.

Silver laurel wreath sticker for exterior application. Die cut vinyl with white application tape overlay. Ref: MSA1150.

Metallic ''Negative Ground'' decal.

Vinyl self-adhesive sticker/decal, metallic silver. Blue ''Leyland'' with ''ST'' flag logo. Ref: ST110, SMI0124, LMG1017.