All Products

Spacer for 1.25'' HS2 carb; 3/16'' thick aluminum as originally supplied. Ref: 12A0006, 12A6.

Spacer for 1.25'' HS2 carb; approximately .210'' thick. Ref: 1G2623, CS125-5, 134936.

6mm (1/4'') spacer for custom carb installations where something thinner than the standard 1/2'' spacer is needed. Ref: 610849.

CarbSync tool to synchronize airflow through twin carbs. Ref: CARBSYNC, MSA1003, STL0013.

Brighten up your engine compartment with this brushed aluminum dashpot cover; fits HS4 carbs only. Ref: R23, SIE0071.

The correct light-viscosity oil for controlling the movement of the piston inside SU and Zenith-Stromberg carburetors. Ref: BDR125, GGL9035, BDR125S.

Dual carbs, as supplied on the original classic Mini Cooper S. Ref: SIE0083, AUD662, HS2, FZX3051.

Brand-new SU carbs as used on Special Tuning HS4 conversions in the 1960s. Ref: SIE0084, C-AUD640, AUD640T.

Ribbed flat one-piece cargo bed floor for classic Mini Pickup and Van models.

Black carpet kit for 1973-on classic Mini Saloon (sedan) models. Ref: MS126.

Carpet kit for classic Mini Vans and Pickups with late gear change from 1973-1980

Carpet kit for classic Mini Vans and Pickups with magic wand or remote shift up to 1973

Black carpet kit for classic Mini Vans and Pickups with magic wand or remote shift up to 1973.

Renowned Newton Commercial carpet set for the front of all pre-rod change classic Mini Estate/Traveller models to 1973. Ref: CK970.

Deluxe carpet kit for classic Mini Estates with rod change shifter; includes hardware and instructions. Ref: CK955, Newton Commercial.

Complete carpet set for pre-1973 classic Mini Saloon (sedan); includes all parts and instructions. Ref: CK960, CK960A, CK960P.

Complete carpet set for early classic Mini Saloon (sedan); includes all parts and instructions

Complete moulded tufted-style carpet set for the post-1973 Mini Saloon (sedan) in black.

Complete carpet set for post-1973 Mini Saloons (sedan); includes all parts and instructions

Set of eight snap assemblies used to hold down the carpet to the floor of the classic Mini. Ref: CARPET01, SST0054.

Fits SPi/MPi classic Minis 1990-on, and is ideal for the classic Mini owner who wants to maintain low emission levels. Ref: RV8009, WAG103910SLP.

Metal seal between the classic Mini catalytic converter flange and the pipe. Ref: GEX7761, CRC9328SLP.

Phone holder with 5v USB port replaces the existing ashtray in the Classic Mini padded dash rail. Ref: MSA4000.

Chrome plastic center cap for 10'' or 12'' Minator Wheel. 55mm diameter.

Plastic cap with JBW (John Brown Wheels) logo center stickers; 62mm wide. Ref: MWSCAP2, SWT0180.

Plastic chrome center cap for the Minilife wheel; fits 66mm opening. Sold each. Ref: C-21A1962, 21A1962.

Replacement center cap for 6''x10'' Genuine Minilites manufactured from the 1990s-on. 50mm tall. Ref: C-21A1908.

70mm plastic center cap to fit currently produced Mamba wheel. Will not fit original Mambas! Ref: SWT0163, CCMAM2.

67mm center cap for the second-generation 6x12 Revolution wheel. Ref: REV13.

Black plastic center cap (with no logo) to fit 12'' and 13'' Rover-supplied MiniLite-style wheels. Ref: NAM9105PMD.

Center cap with Mini Cooper wreath logo on silver. Fits 12'' and 13'' Rover-supplied MiniLite style wheels. Ref: DTC100690, DTC100690MNH.

Center main bearing cap kit for A-Series or A+ 1300 blocks (not for Cooper S). Strengthens the center mail bearing cap.

Center main bearing cap kit for 998 and 1098 blocks. Strengthens the center main bearing cap; requires machining the cap flat before installation.

Improved pipe that moves the oil pick-up point towards the center of the engine. Ref: C-AHT54, C-AHT0054.

Thick-wall metal coupling sleeve to connect rod change shifter to gearbox selector pin

One-way check valve in the vacuum hose to maintain suction on the diaphragm. Ref: 17H2646, LBEAC9030AP, LV15069.

Choke cable for 1990-onward classic Minis, with positive locking pull.

Universal choke cable, 46'' length. Plastic knob marked ''lock''. Ref: BHH526, BHH0526, BHH653.

Choke cable for 1987-1990 998cc classic Mini models. 31'' length, ratchet action. Ref: SBF10027.

Cable with finger-pull Bakelite knob with ''CHOKE'' text. Proper and original-looking reproduction. Ref: 21A1202.

Modern version of the Mk1 choke cable assembly, with finger-pull plastic knob with ''CHOKE'' embossed text. Ref: 21A1202MS, 21A1202, 21A1202E.

Cable as found on Mk1 classic Minis, typically with twin carbs. Black bakelite knob, marked ''CHOKE'' and ''LOCK''. Ref: 21A1204.

Cable as found on Mk1 classic Minis, typically with twin carbs. Black plastic knob, marked ''CHOKE'' and ''LOCK''. Ref: 21A1204MS, 21A1204.

Choke cable for most late classic Minis, with international symbol for ''choke'' on the end; will fit all classic Minis up to about 1990. Ref: 21A2329, NAM6834.

This is the nut found on Mk3-on classic Minis, and is not the same thread as the 6-sided nut used on Mk1-Mk2 Minis.

This is the full-width chrome finisher strip that clips to the lower dash tray edge. Ref: 14A8009.

Oval chrome metal trim strip that surrounds the three center-mounted gauges on classic Mini Deluxe/Cooper models.

Circlip that locks the first motion shaft bearing 13H6080 outer race into the flywheel housing. Ref: 2A3643.