All Products

Written by British Motor Heritage Trust Archivist Anders Ditlev Clauseger, this book chronicles all the essential facts about Mini Cooper and Cooper S models. History, description and analysis, specifications, production

Cooper and Cooper S classic Minis used this bracket to double-up on the rear exhaust mount for added strength. Easily adapted to earlier or later classic Minis by drilling one hole in the subframe.

Heavy-duty flat band exhaust clamp in stainless steel, 1-5/8'' diameter. Ideal for use in confined space. Ref: GEX158, 412-026.

Low-profile, heavy-duty flat band exhaust clamp in stainless steel, 1.75'' diameter. Ref: GEX175, 412-027.

Conventional exhaust clamp to fit 1-3/4'' pipe. Ref: GEX9007.

Heavy-duty flat band exhaust clamp in stainless steel, 1-7/8'' diameter. Ideal for use in confined space. Ref: GEX178, 412-029.

Conventional exhaust clamp to fit 1-7/8'' pipe.

Heavy-duty, cast iron version of the standard exhaust clamp fitted to cast iron manifolds. Ref: GEX7046CAST, GEX7046, GEX7046HD.

Two-piece exhaust clamp to the two-pipe cast iron manifold 1990-on, and also the single pipe manifold 1991-on.

Universal exhaust clamp to fit 2'' outside-diameter pipe.

Low-profile, heavy-duty flat band exhaust clamp in stainless steel, 2'' diameter. Ref: GEX200, 412-030.

Exhaust downpipe for fuel-injected classic Minis. Includes stainless braided flex coupling to allow for engine movement. Ref: GEX12043, GEX12043E.

High-performance downpipe assembly bolts directly to the exhaust manifold used on the fuel injected SPi and MPi classic Mini. Ref: C-AEG372.

Clamp and hanger kit for the 850/998cc classic Mini Saloon (sedan) exhaust system. Ref: GEX9551, DUC008069EVA.

Flat sheet metal gasket between the cast iron exhaust manifold and the down pipes of fuel-injection (SPi/MPi) classic Minis. Ref: GEX7779, WCM10019EVA, WCM10019.

Metal exhaust hanger strap at front of rear subframe. Ref: GEX7248.

Exhaust hanger strap, from the rubber mount at front of rear subframe to the pipe. Ref: GEX7082, ADU007082EVA.

Center exhaust hanging strap for the classic Mini Estate, Van, or Pickup. Ref: GEX7273.

Bolt-on rear exhaust hanger hook to accept the GEX7661 rubber hangers, as used 1992-on classic Minis.

Rear exhaust hanger bracket for the classic Mini Saloon (sedan), up to 1990. Ref: GEX7084, 2A2204EVA.

Bolt-on front exhaust hanger hook to accept the GEX7661 rubber hangers, as used 1992-on classic Minis.

Spool or bobbin mount for exhaust bracket at rear of rear subframe. Ref: GEX7251, QEF122, BLT4.

Square block exhaust mount; bolts to front of rear subframe and is the main support for the exhaust system. Ref: GEX7081.

Heavy-duty version of the square block exhaust mount for the classic Mini. Ref: C-19G3257.

Polyeurethane spool or bobbin mount for exhaust bracket at rear of rear subframe. Ref: GEX7251POLY, GEX7251HD, GEX7251.

Isolating rubber ring hanger exhaust mount for 1990-on classic Minis.

Maniflow exhaust system with two mufflers, 1.75'' pipe with center exit exhaust. Rolled edge on chrome muffler tip. Ref: C-ARA332.

Big-bore, 1-7/8'' diameter exhaust system by Maniflow; recommended for high-performance 1275s or 1380s. Mild steel system with two mufflers, standard exit exhaust. Ref: C-ARA337.

Maniflow twin box exhaust system for any classic Mini originally fitted with catalytic converter. Ref: C-ARA336.

This system from Maniflow (pipes, resonator and muffler) is made for the long-wheelbase versions of the classic Mini: the Van, Estate and Pickup

Single-can exhaust system for 850 and 998cc classic Minis using the stock cast iron exhaust manifold. Ref: GEX106, AN292E, GEX044901.

Dual-muffler, standard exhaust system correct for most classic Minis with single carb on a cast iron manifold. Ref: GEX177.

Full-length two-can exhaust system for long-wheelbase classic Minis (Van, Estate, and Pickup). Ref: GEX155, AN377E, GEX0155, GEX044234.

Special cap for PCF101240 expansion tank as fitted only to front-mounted radiator MPi classic Mini models. Ref: GRC1184, PCF101240.

Original expansion tank as found on MPi Minis only; allows water to run to and from the radiator as it expands and contracts. Ref: PCF101240, PCF101241.

A revised edition of this chunky book, which looks at the post-war history of Britain's motor industry in overseas markets, concentrating on the experience of first Austin, then the British Motor Corporation (BMC), and finally British Leyland and its constituent companies.

Mini official workshop manual (1959-1976) 9th edition. The complete professional or amateur mechanic's guide to all repair and servicing procedures. 362 pages. Ref: 978-1855201484.

This is the most complete workshop manual available for your Mk1-Mk3 classic Mini. Covers all models from 1959-1976, includes 178 pages of Australian-specific data

Within these pages, respected classic car historian James Taylor gives each major model of Mini its own section. These sections provide full details of specifications and examine individual areas of each model in depth.

Fan belt for use with standard, small water pump pulley and alternator. Made in England. Ref: GCB10813, QBA813.

Fan belt for use with standard small water pump pulley and alternator or generator with small pulley. Ref: 9.5X825, GCB10825.

A longer fan belt to work with the large-diameter water pump pulley as used on the classic Mini Cooper S. Made in England. Ref: GCB10838, GFB1002.

For race applications when the alternator/generator is removed. Use with large diameter water pump pulley and standard diameter crank pulley. Made in England.

Replacement electric fan designed to fit all classic Minis (1991-1996) with a round hole in the inner fender.

Electric fan and bracket kit for MPi classic Minis with the front-mounted radiator, 1997-2000. Ref: PGG100890E, PGG100890MS.

As-original 4mm-thick steel fan spacer, as used on most side-radiator classic Minis, except Clubman. Ref: 12A312, 12A0312.

Some classic Minis had a spacer between the water pump and the fan in order to move the fan closer to the radiator or clearance the valve cover breather.

Late classic Mini Cooper temperature sending unit; unit screws into the thermostat housing "sandwich" plate. Ref: YWL10010, GVS188.