Home > Classic Mini DIY: Rebuilding a Classic Mini Gearbox #6
Products 1-17 of 17
Show
Price: $34.95
View
1/4/2021 12:00:00 AM
39.9500
Pending Warehouse Check
Item #: AHU1856E -
Large bearing as used to support the differential in all classic Mini models. Ref: AHU1856E, AHU1856.
Featured!
Price: $73.50
View
10/6/2019 2:00:00 AM
57.9500
Pending Warehouse Check
Item #: AHU1856-RHP -
OE diff carrier bearing for high-performance transmissions; made by RHP. Ref: AHU1856, AHU1856-RHP.
Price: $25.95
View
4/14/2021 2:00:00 AM
24.9500
Pending Warehouse Check
Item #: AHU1707 -
These 1.375'' OD bearings are found in both the 1979-on classic Mini gearbox and the flywheel housing. Ref: AHU1707, TUK100320.
Price: $13.95
View
10/6/2019 2:00:00 AM
12.9500
Pending Warehouse Check
Item #: 13H7848 -
Bearing that supports the .75'' pin of the idler gear on 4-synchro transmissions up to 1979. Ref: 13H7848.
Price: $12.95
View
3/23/2022 12:00:00 AM
13.95
Pending Warehouse Check
Item #: 88G0302 -
The upper arm uses two of these bearings; worn oil seals can allow them to be damaged from road grit. Ref: 88G302, B1212, 88G0302.
Price: $509.50
View
6/5/2019 12:00:00 AM
359.9500
Special Order
Item #: C-AJJ3385 -
Heavy-duty differential recommended for any high performance road-driven classic Mini or Mini Cooper. Ref: C-AJJ3385.
Item #: CHM0085 -
Differential side cover with bushing installed. Fits Minis 1959-73, but can also be used on left side of rod-change transmission with yoke outputs or pot joint. Ref: CHM85, CHM0085.
Item #: DAM3108 -
Shimming used so the differential bearings to achieve proper preload; .006'' thick. Ref: DAM3108.
Item #: DAM3109 -
Shim used with the differential bearings for proper preload; .010'' thick. Ref: DAM3109.
Price: $3.50
View
7/12/2021 2:00:00 AM
3
Pending Warehouse Check
Item #: DAM3633 -
Used to shim the diff to obtain proper bearing preload; .020'' thick. Ref: DAM3633.
Price: $0.86
View
QTYDISCOUNT
Pending Warehouse Check
Item #: 2A3506 -
Thin paper gasket between the gear case and the differential housing. Lower section only, fits pre-rod change models. Ref: 2A3506, 2A3506B.
Item #: 2A3505 -
Thin paper gasket between the gear case and the diff housing; upper section only. Ref: 2A3505, 2A3505B, GUG705709GM.
Item #: 22A1611 -
Gasket for the classic Mini's differential side cover. Ref: 22A1611, GUG705567GM.
Price: $0.86
View
QTYDISCOUNT
Pending Warehouse Check
Item #: 22G1836 -
Thin paper gasket between the gear case and the diff housing. Lower section, fits rod change only. Ref: 22G1836, GUG705642GM.
Item #: TRK10004B -
This version of the side cover gasket comes with built-in sealant attached to the paper. Ref: TRK10004B, GUG705567GM.
Price: $11.50
View
11/14/2018 2:00:00 AM
12.9500
Pending Warehouse Check
Item #: MSSK050 -
AKA an ''anti-oil leak kit'', this handy kit updates early rod change boxes to the later design, while replacing common problem area seals. Ref: MSSK050.
Price: $7.50
View
11/10/2017 2:00:00 AM
6.9500
Pending Warehouse Check
Item #: ADU5738VITON -
Upgraded Viton drive shaft or diff output shaft oil seal; also called diff side cover seal. Ref: ADU5738VITON, ADU5738, NB684, AHU1081.
Questions? Email parts@7ent.com, or call
(800) 992-7007 (U.S. only) or (530) 886-0771