Seats & Upholstery

Vinyl-covered trim panel to cover the rear parcel shelf, below the rear window; as used on classic Minis 1959-1996

Carpeted trim panel to cover the rear parcel shelf, below the rear window. As original on 1996-on classic Minis, but will fit any year classic Mini Saloon (sedan).

Vinyl-covered trim panel to cover the rear parcel shelf, below the rear window. As original on Mk3 Minis 1970-1980.

Liner for the pocket found on either side of the rear seat of the classic Mini Saloon (sedan); fits Minis from 1959-1973.

Black-finish liner for the pocket found on either side of the rear seat of the classic Mini Saloon (sedan); fits Minis from 1959-1973.

Liners that slip into the rear pockets and are a tight fit. You will notice the creases in the fibreboard, bend accordingly and push into place.

The complete rear seat assembly seen here has been developed to match in appearance our Bucket & Suffolk reclining front seats.

Fitted to all classic Mini Saloons (sedans) 1960-1980. Shaped to the original design but made in modern day specification foam.

Modern-type foam cushion, cut precisely to shape. Foam is ready to accept a new seat cover, which is glued to the top surface, then the seat skirts are turned over.

Rear seat pocket lower repair section for Mk1-2 classic Mini Saloon (sedan). Replaces rusty area where pocket contacts the floor; flanged at the top for welding.

This leather seat kit has been developed to match the appearance of the leather Bucket and Suffolk reclining front seats

This design is based on the earlier classic Mini Cooper Mk1 style of the 1960's. The seat covering kit is to replace your old seat covers using your existing frames and foam cushions.

Rear seat pan edge finisher. Pushes over the metal lip just in front of the rear seat. Reproduced in the original grey color that was used on classic Mini Saloons up to around 1990

Rear seat foam and padding kit for the very early, 1959-60 Austin and Morris Mini saloon.

Wire frame for the rear seat of 1960-1970 classic Mini Saloons (sedans)

Chrome trim on top edge of the rear seat side pocket. Ref: ALA5828, ALA5829, CZH2723, CZH2724.

Reclining seat for Mini Cooper Mk2 1967-1970. The new frame of this seat incorporates a totally new reclining mechanism, which now gives the look of the original Factory recliner that was available in the 1960s.

Reclining seat for Mini Cooper Mk3 1970-1973. The new frame of this seat incorporates a totally new reclining mechanism, which now gives the look of the original Factory recliner that was available in the 1970s.

Reclining seat for Mk1 and 1974-on. The new frame of this seat incorporates a totally new reclining mechanism, which now gives the look of the original Factory recliner that was available in the 1960s.

Complete seats with twin post headrests, easy to install and made of high-spec automotive vinyl. Frame base has been designed to look identical to your original seat, which allows easy front to back movement on the plastic slides on the carpet.

Leather version has the seat faces made in leather, with remainder of the seat cover in matching vinyl. These Suffolk seats come complete so that all you need to do is unpack it and bolt it straight in the car.

Metal surround to retain and finish the shift boot on early 850 classic Minis with the long gear shift lever, known as the ''magic wand''.

Metal retainer for CZH4278 rod change shift boot.

Wire seat diaphragm that fits all classic Minis built between 1960 and 1993. Ref: C708.

Original-style diaphragm as fitted to the Mk2 classic Mini; includes the necessary springs to attach it to the seat frame.

Front seat back foam for classic Minis 1967-80. Ref: SF3012.

Seat back padding, made from a composition of rubberized horse hair.

Wire diaphragm replacement for the earlier CZH3508 rubber version (pre-1973); for classic Minis 1973-1993. Ref: C711.

Late classic Mini seat frames had a slightly different shape and therefore used a unique rubber/woven-design diaphragm in the seat base. Ref: C719, HGD100150.

Seat belt rear anchor reinforcement for floor tunnel. Welds in place from underneath. Includes welded-in threaded belt hardware mounting points.

Retractable U.K.-made 3-point front seat belt to replace those on classic Minis already fitted with this belt arrangement. Ref: MSSB1111, MSSA1111.

U.K.-made 3-point belts are ideal replacements for worn or sun-weakened stock inertia reel front seat belts. Ref: MSSB1111BLUE, MSSB1111RED, MSSB1111GREY.

Front-only black webbing seat belt for 3-point mounting. The stalk between the seats eliminates fumbling for the belt end. Ref: MSSB1112, SAC0196.

Black retractable 3-point automatic rear seat belt kit for Classic Minis up to 1996. Ref: MSSB1109, SAC0198.

Retractable 3-point automatic rear seat belt kit for Classic Minis up to 1996. Ref: MSSB1109GREY, MSSB1109BLUE, MSSB1109RED.

Maintain the vintage look of your 1970's classic Mini with these non-retractable shoulder belt kits. Ref: SEATBELT04, 18G9113.

Manually-adjustable 2-point classic lap belt features vintage-style chrome buckle. Ref: 18G9112, SEATBELT011.

Non-retracting belt to suit late classic Minis with 3 mounting points at rear seat back. Made in the U.K. Ref: MSSB1113, MSSB1113BLUE.

Non-retracting belt to suit late classic Minis with 3 mounting points at rear seat back. Made in the U.K. Ref: MSSB1113GREY, MSSB1113RED.

Pair of aluminum brackets to allow some repositioning of the original seats to obtain more leg room or increased rake. Fit in standard brackets on the crossmember.

Seat bracket, attaches to crossmember for seat mounting and fore-aft adjustment. Sold each, two required per seat

Six-piece front and rear seat cover kit for 1962-1967 Austin and Morris Cooper and Cooper S; made in the U.K. by Newton Commercial

Stamped metal panel that forms the mounting point for the front seats for Mk4 and later classic Minis with rod change transmission and square tunnel. Ref: CZH2675, 13.32.01.05.

Stamped metal box section that runs across the floor and forms the mounting point for the classic Mini Mk1, Mk2 and Mk3 front seats. Ref: 14A9533, SBO0693.

The large U-bracket that bolts to the floor to lock the front driver or passenger seat in place; sold each

Individual clip to retain headliners and seat fabric to the seat frame. Ref: 14A8094.

Metal clips to attach fabric to standard seat frame. Bag of 20 pieces. Ref: C707, GHF1500.

This cosmetic leather shift boot cover fits all Mk1, Mk2 and early Mk3 classic Minis built with the early tunnel arrangement, but fitted with the remote control gear change (i.e. not 'Magic Wand')