Seats & Upholstery

Front and rear seat cover kit, in one-color vinyl, to fit classic Mini saloons (sedans) with reclining front seats with no head rests

Front and rear seat cover kit, in vinyl with matching cloth face, to fit Mini saloons with reclining front seats with no head rests. Designed with DIY restorers in mind.

Original-design classic Mini rubber seat base diaphragm, complete with hooks; as used up 1973. Ref: C705, CZH3508.

Cushion as used on the majority of Mk1 classic Mini front seats; approx. 2'' thick with an extra 1'' thick piece that can be glued to the front edge to give the seat cover definition and leg support. Ref: SF659.

Front seat base foam as introduced in the Mk2 classic Minis and used 1967-1980. Ref: SF3010.

Simple length of tailored foam padding material that fits to the base of the front seat frame under the seat cover skirt. Ref: SF660.

This leather handbrake boot will suit all classic Mini models; attaches to the carpet with Velcro stitched to the underside. Special order, lead time may be required.

Vinyl handbrake boot to over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Vinyl handbrake boot fits over the handbrake lever in any Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure

Vinyl handbrake boot fits over the handbrake lever in any classic Mini. Attaches to the carpet with "Velcro" type hook-and-loop closure.

Rubber grip that makes grasping the handbrake lever a little nicer on a cold day. Ref: 13H5541.

This original set of headlining stays are suitable for all classic Mini saloons (sedans) built after 1970. The color-coded stays are inserted through hoops in the headlining kits. Instructions included.

Classic Mini Pickups had a one-piece headlining frame with the canopy glued and stapled to it. Cream Crackle was used on early models and the light grey was used during the 1970's

Headliner canopy kit in original cream-crackle for Riley Elf and Hornet. Includes C-post trim panels. Ref: HL3005A, HL3005P, HL3005W, HL3005C.

One-piece headlining canopy held place by six specials stays. Ref: HL3012, HL3012A, HL3012P, HL3012W.

One-piece headlining canopy, held place by six specials stays (not included). Ref: HL3012, HL3012A, HL3012C, HL3012W.

Headliner kits for Mk1 classic Mini saloons (sedans) 1959-1967. Ref: HL3000, HL3000A, HL3000C.

Headliner kits for Mk1 classic Mini saloons (sedans) 1959-1967. Ref: HL3000, HL3000W, HL3000P.

Classic Mini saloons (sedans) 1967-70 had a two-piece headlining frame with the canopy glued and stapled to them. Ref: HL3010P HL3010W.

Headliner kit for classic Mini saloon (sedan) two-piece headliner frame, as used 1967-1970. Ref: HL3010A, HL3010C.

Two-piece headliner kit for 1960-1970 classic Mini Traveller. Ref: HL3020, HL3020A, HL3020P, HL3020C, HL3020W.

One-piece headliner canopy kit for classic Mini van models

One-piece headliner canopy kit for classic Mini van models; white.

Hook clip used to connect the seat diaphragm to the frame of the seat.

Interior door cappings in burl walnut; for use on classic Minis with roll-up window doors. Ref: MSA0191.

Sliding-glass window door interior panel set for the classic Mini Mk1 and Mk2 Riley Elf and Wolseley Hornet

Roll-up window door panel set for the classic Mini Mk3 Riley Elf and Wolseley Hornet

Metal ''P'' clip for attaching the upholstery panels in the cargo area of the classic Mini Estate wagon

19-piece kit from Newton Commercial includes all the panels you will require to trim your Mk1 classic Mini, both the Cooper model and the standard model.

19-piece kit includes all the panels needed to trim a Mk1 or Mk2 classic Mini fitted with a central round speedometer binnacle.

19-piece kit from Newton Commercial includes all panels required to trim your Mk2 classic Mini. Ref: TK3001.

13-piece kit from Newton Commercial includes all the panels you will require to trim your Mk3 classic Mini fitted with a central oval speedo binnacle.

This 9-piece interior trim panel kit includes door panels, rear quarter panels, rear pocket liners, wheel arch covers and a rear parcel shelf liner.

These quarter panels are from our Monte Carlo Range and suit all saloons from 1970 to 1996. Available in a range of colors.

Pair of interior upholstered door panels for 1970-96 classic Minis.

Pair of interior upholstered door panels for 1970-96 classic Minis; black only.

Interior rear quarter panel pair, as originally fitted to all U.K.-built Mk1 and Mk2 classic Mini Saloons and Coopers

Handy PVC tie-bag sized to fit the classic Mini jack and handle. Ref: STL0065, CK721, CK721A.

Lucas lamp cover with stylized lion and ''Q'' in vertical band of white, made by Newton Commercial per original design. Ref: SL2010, SL2040.

Lucas lamp cover with stylized lion and ''LUCAS'' text, made by Newton Commercial per original design. Ref: SL2025, SL2030

Heavy rubber mat with ''MOKE'' embossed on it; designed to fit on top of the side panels. Ref: BHM9650.

Sturdy, adjustable seat subframe to fit a Cobra seat into a classic Mini 1964-2000. No lock-down. Ref: SEAT09, COBSUBFR02, SSE0002.

Pair of strengthening and locating brackets required to mount the fiberglass reproduction classic Mini Moke seat ALA7193F

99% of all classic Minis had painted ''A'' post pillars in all sorts of colors. This kit (pair) has been developed to fit exactly in this space with the least amount of fitting.

Plastic cover that finishes off the metal lever on the 1976-on bonnet latch, and also the seat adjusting latch on all years of classic Mini. Ref: CZK8289.

Early classic Mini Estate models used this 4-piece load area carpet set style until 1966

Classic Mini Estate two-piece rear carpet set as used from 1966-on. Ref: CK972, Newton Commercial.

Classic Mini Estate two-piece rear carpet set as used from 1966-on; black.