Cooling Systems

Replacement plastic ''squirrel cage'' fan, for classic Mini fresh-air heaters 1963-1969. Ref: 17H8108, SCO0029.

These long bolts pass horizontally through the cast engine mounting bracket under the front pulley and hold the main radiator support bracket. Ref: HBZ534, HBZ0534, 12G1318.

Bolt with flanged-head, for use on A+ thermostat housing with sandwich plate underneath it. Ref: DAM7760.

Blanking plate kit for the fresh air heater hose hole in 1962-75 classic Minis; includes powder coated metal plate, rubber seal, and pozidrive screws. Ref: 14A9992, 14A9992KIT.

Blanking plate as used on early, 1962-1975 classic Minis that did not receive the optional fresh air heater. Ref: 14A9992.

Lower radiator rubber bushing, as used in one-piece metal radiator housings. Ref: CAM4618.

Poly version of the obsolete lower radiator bushing, as used in one-piece metal radiator housings starting in 1974. Ref: CAM4618P, CAM4618POLY.

Good-quality convoluted bypass hose, which can be compressed to fit with the head still in place. Ref: 12A1093-MS, 12A1093MS, 12A1093, GZA2083.

Reinforced plain rubber hose for the water pump to cylinder head bypass. Ref: AEG484.

The magic in any of the silicone hoses is that they can be removed and reused many times; they seem to last forever! Ref: C-GZA2083.

Plastic clip to retain radiator fan switch in SPi (single-point injection) classic Minis only. Ref: KTP9002.

Cog drive belt for use with small (3.15'') water pump pulley conversion. Ref: C-BELT255, C-AEA537.

Universal aftermarket heater for mounting in compact areas; accepts 1/2'' water lines, suitable for the earlier classic Minis. Ref: C-ARA3000, 24A1898, 24A1898-N.

Pair of metal demister hose covers, or ''ears'' for the classic Mini Mk1 and some Mk2 fresh air heaters, typically 1963-1969. Ref: MSP004, 24A1289, 24A1290.

Metal demister hose covers for the classic Mini Mk1 and some Mk2 fresh air heaters, typically 1963-1969. Ref: MSP004, 24A1289, 24A1290, SCO0027.

Plastic corrugated hose for windshield demister vent, for classic Mini Mk3 and later. Ref: CZH1753, JKC10017.

Black finisher for classic Mini dash when fitted with vinyl covering. Fits over the windscreen demister duct outlets. Ref: 14A9949.

Chrome finisher for classic Mini dash when fitted with vinyl covering. Fits over the windscreen demister duct outlets. Ref: 14A9949, 14A9949CHROME.

Original drain plug, for radiators originally equipped with drain. Not for replacement radiators. Ref: ARA1618.

Special cap for PCF101240 expansion tank as fitted only to front-mounted radiator MPi classic Mini models. Ref: GRC1184, PCF101240.

Original expansion tank as found on MPi Minis only; allows water to run to and from the radiator as it expands and contracts. Ref: PCF101240, PCF101241.

Fan belt for use with standard, small water pump pulley and alternator. Made in England. Ref: GCB10813, QBA813.

Fan belt for use with standard small water pump pulley and alternator or generator with small pulley. Ref: 9.5X825, GCB10825.

A longer fan belt to work with the large-diameter water pump pulley as used on the classic Mini Cooper S. Made in England. Ref: GCB10838, GFB1002.

For race applications when the alternator/generator is removed. Use with large diameter water pump pulley and standard diameter crank pulley. Made in England.

Replacement electric fan designed to fit all classic Minis (1991-1996) with a round hole in the inner fender.

Electric fan and bracket kit for MPi classic Minis with the front-mounted radiator, 1997-2000. Ref: PGG100890E, PGG100890MS.

As-original 4mm-thick steel fan spacer, as used on most side-radiator classic Minis, except Clubman. Ref: 12A312, 12A0312.

Some classic Minis had a spacer between the water pump and the fan in order to move the fan closer to the radiator or clearance the valve cover breather.

Late classic Mini Cooper temperature sending unit; unit screws into the thermostat housing "sandwich" plate. Ref: YWL10010, GVS188.

Two-blade fan for racing; can be used in pairs for four-blade fan. Ref: 2A997, C-2A997, C-2A0997.

6-blade metal fan, as used on the classic Mini Cooper S and in tropical climates. Heritage. Ref: 2A998, 2A998/HTG, 2A0998.

Heritage has used the original tooling to remake the Mowog 11-blade fan exactly like the original. Ref: 12G2129, 12G2129/HTG.

Metal firewall blanking plate with one hole for a heater hose. Ref: ALA6592.

Metal firewall blanking plate with two holes for heater hoses. Ref: ALA7530.

Metal firewall blanking plate with no hose holes. Ref: ALA6593.

Installation kit to mount the water pump (not included) to your engine block. Works with any A-series water pump. Ref: GWP134FK.

Male-male fitting used when oil cooler hoses with 1/2'' BSP fittings at each end are used. Ref: MOC2, AHA6423.

Kit for Mk1 (and some Mk2) classic Minis with fresh air heaters, typically 1963-1969; includes steel face plate and demister hose covers.

Fresh air hose kit for Mk1 and Mk2 classic Mini fresh air heaters; includes hose, grommet, and wire clamps. Ref: 24A2156, 24A2156KIT.

45'' length of special-diameter tubing, vinyl covered inside and outside. Ref: 24A1256.

Pair (left and right) of fresh air vents that pass through the dashboard, and used on 1976 and later classic Minis. Ref: JPC8632.

15 Amp bladed fuse, as used in multiple circuits on MPi (multi-point or twin-point injection) Classic Minis. Ref: DJP8800.

Gasket for the heater control valve on the cylinder head; also used under the blanking plate. Ref: 88G221, 88G221B.

Cork gasket for all classic Mini thermostat housings; alternative to the standard paper gasket. Ref: GTG101, GTG101C.

Heavy paper gasket that fits between the thermostat housing and the cylinder head; fits all A-series and A+ engines. Ref: GTG101, GTG101MS.

Large-diameter grommet to protect the fresh air hose where it passes through the firewall. Ref: 24A2195, TFS9915-000.

Heater cable as used on late-model classic Minis with in-line heater control valve. Loop end; 31'' length of inner cable. Ref: JFF10003.