Weatherstripping

Aftermarket floor plug 3/4''. Fits rear floor and battery box. Ref: 14A7090, C546, 14A7090E.

Thick, heavy rubber plug as used originally on classic Minis with 7/8'' holes in the floors, Mk1-Mk2 radius arm cover plates, unused steering column hole, antenna holes, and unused wiper holes in the cowl.

Flat rubber plug for 9/16'' hole. Sold each.

This is the thin rubber strip that lines the metal channel of the hinged quarter window frame and secures the glass. Sold in a two-meter length sufficient for one window.

Rigid twin-groove sliding window channel for upper location of rear side window glass in classic Mini Estate models.

Rigid lower side window channel for the rear of the classic Mini Estate models. Felt/cloth over metal, ends may require trimming for correct angle and length.

Rubber plug to fit the 5/16'' hole on each inner fender and the rear seat pocket on Mk1 classic Minis. Ref: 2H7274.

Small rubber plug to block unused holes in the rear valance body panel where lights are not fitted. Ref: 14A7032.

Large rubber plug on left rear of the classic Mini remote housing that allows access to the shift rod and socket.

Small rubber seating gasket under the door handle safety boss. Ref: 24A1835.

Thick rubber seal between the front turn signal and the body, as used on U.K. classic Mini Mokes. Ref: 54573115.

Continuous rubber seal for the classic Mini front windshield. Ref: CZH1719MS, JPC4834, 14A8746.

Front windshield seal version as introduced in 1991, but it will fit earlier classic Minis also. Ref: CCB100130, CCB10011MS.

Foam rubber seal that goes between the headlight bucket and the fender on MPi classic Minis equipped with motorized self-adjusting headlights. Ref: XBC105250.

Thick rubber seal, fitted under the glass lens on the license plate light used on Mk1/Mk2 classic Minis, plus Van, Estate, and early Moke. Ref: 54571498, 57H5368.

Seal for fixed quarter windows on late-model classic Minis. Ref: JRC2673.

Original-style sponge rubber window seal for opening quarter-light windows as found on Mk1-Mk2 classic Minis. Ref: ALA5897.

Starting with the Mk3 models, the quarter window seal design became a rubber bulb attached to a vinyl channel. Ref: EAM7724, PAM1019.

Special-shaped seal for left-hand rear door on classic Mini Van and Estate models. Reproduction.

Special-shaped seal for right-hand rear door on classic Mini Van and Estate models. Reproduction version made of rubber sections glued together.

Rear glass seal, continuous rubber type; fits Mk1 classic Minis 1959-1967. Ref: 14A8744.

One-piece rear glas seal that fits all classic Minis Mk2-on; must be shortened for use on Mk1 classic Minis. Ref: JRC2674, CDB10017.

Door glass seal that fits window in left- or right-hand rear door of the classic Mini Van and Estate.

T-shaped rubber seal that fits into the lower windshield frame and seals the gap to the body; fits Cagiva- and Portuguese-made Mokes. Ref: ALA7231.

Flat foam seal that fits into the lower windshield frame and seals the gap to the body; fits UK- and Australian-made classic Mini Mokes. Ref: ALA7231-FOAM.

Rubber seal between lamp base and body on Mk2 classic Mini Saloons. Ref: 37H2689, 37H2690.

Left-hand side rubber gasket for lamp base-to-body on Mk4 and later classic Mini Saloons with reverse lights. Ref: 37H2691, 54590554.

Right-hand side rubber gasket for lamp base-to-body on Mk4 and later classic Mini Saloons with reverse lights. Ref: 37H2692, 54590555.

Flanged rubber grommet that fits around the fuel tank neck to seal the hole and to prevent vibration. Ref: 14A7057, 14A7057E.

Rubber grommet fits around the tank neck to seal the hole and to prevent vibration. Original-type as used pre-1997. Ref: 14A7057, 14A7057GENUINE.

Thin, flat rubber tank neck grommet, designed for use with the revised tank neck of the MPi classic Mini. Ref: WGG100010.

Flexible channel that fits upper channel in the door on sliding-window classic Minis. Ref: 14A7167.

Left-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3077, CZH4156.

Right-hand side window channel for all roll-up window classic Minis with internal door hinges. Ref: PAM3076, CZH4155.

Rigid vertical dual channel for sealing rear side windows in classic Mini Estate models. Fits forward location only.

Rigid dual-channel vertical window glass seal for rear of side windows in classic Mini Estate models. Ref: 14A7630.

Rubber channel (seal) to fit in metal door glass lift brackets; four (4) required per car. Ref: 24A948, 24A0948.

Small metal chrome cover for windscreen seal filler strip insert. Ref: JPC2017.

Chrome filler strip to help seat both the front and rear windscreens on the classic Mini. Ref: 24A1466, SBO0027C.

Black filler strip to help seat both the front and rear windscreens on the classic Mini. Ref: SBO0027B, PW5013, PV302, 24A1466.

Three-piece classic Mini Moke windscreen full seal set; includes glazing and frame-mounting seals.

The rubber bottom seal piece for the classic Mini Moke windshield. Ref: MYH5096.

Pro-quality rubber-handled tool for installing the filler strip in the front and rear classic Mini windscreens. Ref: TOOL12, STL0026, 18G468.