Sliding Window Door Accessories

Kit for the early classic Mini Mk1 door handle design; includes door handles plus t-handle boot handle with matching keys. Ref: 24A1140KIT, 24A1140.

Door and boot handles as used on classic Mini Saloons from 1966-1969, and on U.K. Van, Estate, and Pickup until the end of production. Ref: 24A2083KIT, 24A2083.

Chrome lower window channel for sliding window doors. Ref: 24A1303, 24A1304

Round fiber washer that fits under the chrome window lock boss on the outside of the glass. Ref: 14A7065, 14A7065B.

Pozidrive screw to attach the window lock to the chrome boss. Ref: RMP307, RMP0307.

Slim exterior locking door handle for classic Minis to 1966; escutcheon sold seperately

Single locking exterior door handle with keys, bezel not included.

This is the chrome base plate of the right-hand exterior handle; fits classic Mk1-2 Saloons, and sliding-window Vans and Pickups through end of production

This is the chrome base plate of the left-hand exterior handle; fits classic Mini Mk1-2 Saloons (sedans), and sliding-window Vans and Pickups through end of production

This chrome button on the door was added to make the door handles safer. Ref: 24A1834.

If you need to replace the locks in an original Mk1-Mk2 classic Mini, this set includes a pair of barrels and keys.

Complete plastic window lock set for all 2-hole sliding windows as found on Mk1-Mk2 classic Mini doors. Ref: MSSK015, 24A1194, 24A1195, 24A1196, 24A1197.

Plastic window lock as used on Mk1 and Mk2 classic Minis; for right front glass. Ref: 24A1194.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, left front. Ref: 24A1195.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, right rear. Ref: 24A1196.

Plastic window lock as used on Mk1 and Mk2 classic Minis; fits the 2-hole glass, left rear. Ref: 24A1197.

Interior door handle for Mk1-2 classic Minis; replaces cable opener for early models and provides an easy-to-use lever for door release. Ref: GLZ119, GLZ119A.

Screw used to hold together the two halves of the disc shields on all classic Mini front discs, as well as retaining the boot lid cable to the bootlid, and used on various door handles and door remote link.

Fold-up chrome window lock for the sliding windows on the rear/side of the classic Mini and (classic) Clubman Estate. Sold each.

Fold-up chrome window lock with plastic latch for the sliding windows on the rear/side of the classic Mini Estate (all models).

Stainless lower window channel lock rail for sliding window doors, as supplied on Mk1 classic Minis until May 1963. Ref: 14A6769, 14A6770.

Set of restoration-quality metal window locks, originally used 1959-1962 but can be fitted to any sliding-window model classic Mini. Ref: MSSK015M, SBO0100.

Aluminum reproduction door hinges that replace the original steel or brass versions. Ref: 14A6818, 14A6819, 14A6820, 14A6821.

Complete alloy hinge set that includes all four (4) hinges and the hardware to mount them. Ref: 14A6818K, SBO0034.

This pin can be used to repair a worn original external door hinge.

This bushing, along with pin 37H3044, can be used to repair a sagging original external door hinge. Ref: 37H3043.

This thick gasket is treated to prevent water damage. Fits the long section of the hinge on the door. Ref: ALA7844, BMP134, 24A2174.

Specially treated thick gasket to resist water damage. Fits the small part of the door hinge on the hinge panel. Ref: BMP135.

Pair of steel wire check straps that will hold your classic Mini Mk1-Mk2 doors in the full-open position; hardware not included. Ref: BG5401.

Set of metric stainless steel bolts, studs and washers to fit the aftermarket replacement hinges only. Ref: 14A6818BOLT, SBO0035.

Angled washer as used on the upper door hinges, on the long portion only. Ref: 14A7387.

Black rubber, bulb-type seal to fit the small door gap of classic Mini sliding-window doors. Ref: XGA9934, XGA9934V.

Black solid rubber u-channel door seal, with hollow foam seal section, as origial for early classic Minis. Ref: XGA9934.

This is the seal that slides on the window; choose right- or left-hand side. Ref: EAM8530, EAM8531.

Flexible channel that fits upper channel in the door on sliding-window classic Minis. Ref: 14A7167.

Small screw used to retain the classic Mini's lower window channel into the metal window lock channel. Ref: GHF400, GHF0400, 24A88.

Improved original rigid-type Mk1-2 classic Mini window channel, with reinforced internal wire and holes in for drainage and securing. Ref: 24A88, 24A88_original.

Specially-formed hose for all sliding window-type classic Mini doors to drain the water away from the window channels. Ref: 14A7930.

Molded plastic seal that sits under the window lock to prevent rattles and the entry of water; fits all four window locks. Ref: 24A1198.

Chrome button on the outside of the glass. Ref: 14A8151.

FS key blank, as used on most door and boot handles, as well as dash-mounted ignition switches. Ref: 17H2475, KEY1.

These fillet panels slot into the space at the front and back of the door panels on Mk1 and Mk2 classic Minis, holding the door panel into the door frame. Ref: DP3022, Newton Commercial.

Moisture barrier/membrane for Mk1 and Mk2 classic Mini interior door panels. This is an aftermarket part that is based on principles used on expensive-car restorations.

Moisture barrier/membrane for Mk3-on classic Mini interior door panels, with precision-cut holes for door locks, window winders, door handles, and speaker holes

Check straps to prevent the doors from swinging too far, for Mk1-2 classic Mini models.

S-shaped metal bracket mounts on the hinge panel where the strap passes over the door seal. Ref: 14A6745.

Metal bracket on the door to affix the restraint strap. Ref: 14A6744.

Stamped metal finisher with recesses for door strap screws; use one on each end of the strap, 4 per car. Ref: 14A764, 14A0764.