Radiators, Brackets, Caps, & Housings

These long bolts pass horizontally through the cast engine mounting bracket under the front pulley and hold the main radiator support bracket. Ref: HBZ534, HBZ0534, 12G1318.

Lower radiator rubber bushing, as used in one-piece metal radiator housings. Ref: CAM4618.

Poly version of the obsolete lower radiator bushing, as used in one-piece metal radiator housings starting in 1974. Ref: CAM4618P, CAM4618POLY.

Good-quality convoluted bypass hose, which can be compressed to fit with the head still in place. Ref: 12A1093-MS, 12A1093MS, 12A1093, GZA2083.

Reinforced plain rubber hose for the water pump to cylinder head bypass. Ref: AEG484.

The magic in any of the silicone hoses is that they can be removed and reused many times; they seem to last forever! Ref: C-GZA2083.

Plastic clip to retain radiator fan switch in SPi (single-point injection) classic Minis only. Ref: KTP9002.

Original drain plug, for radiators originally equipped with drain. Not for replacement radiators. Ref: ARA1618.

Special cap for PCF101240 expansion tank as fitted only to front-mounted radiator MPi classic Mini models. Ref: GRC1184, PCF101240.

Original expansion tank as found on MPi Minis only; allows water to run to and from the radiator as it expands and contracts. Ref: PCF101240, PCF101241.

Metal frame that attaches to left front inner fender to duct air from the radiator through the inner fender. Ref: 14A6498.

Panel on the left inner fender that ducts air from the engine fan through the inner fender; a Heritage product. Ref: 14A6498.

Stamped radiator grille body panel; part of the left inner fender of early classic Mini models.

Lower radiator mounting bracket that bolts on top of the engine front bracket. Ref: 12A2153.

One-piece radiator shroud lower radiator mounting bracket, includes the special through-bolt. Ref: 12A2153, 12A2153E.

Lower radiator bracket as used on 998 Minis with two-piece radiator shroud. Not to be used on Cooper or Cooper S, which are fitted with vibration damper lower pulley.

Formed metal lower radiator bracket for use with two-piece radiator surround. Ref: 12A293, 12A0293.

Upper radiator bracket for classic 1098, 998, or 850 classic Minis that have a one-piece radiator surround. Ref: CAM4619.

Upper radiator bracket(s) for the MPi classic Mini with front-mounted radiator. Ref: PCU103100, PCU103110.

Stainless steel upper radiator bracket, which will fit any 1275cc classic Mini engine. Made in the U.S.A. Ref: FOR022, 12G617S, 12G617.

Special upper radiator bracket as used on 1275 classic Mini Cooper S models. Ref: 12G617, CAM4622, 12G0617.

Stainless steel reproduction of the 1275 Cooper S upper radiator bracket. Ref: 12G617S, 12G617, 12G0617S.

Longer version of the classic Mini upper radiator bracket, as used on the Clubman 127GT. Ref: 12G2453, CAM4621.

Upper radiator bracket used on 1990-1996 classic Minis fitted with a sandwich plate under the thermostat housing, and a single mounting point at the thermostat end. Ref: PCU10135.

Upper radiator bracket between the radiator and cylinder head on small bore classic Minis

Upper radiator bracket as fitted to the 970 and 1071 classic Mini Cooper S models; accomodates the shorter block height of the smaller Cooper S engines. Ref: 12G323, 12G0323.

10lb short-stem radiator cap for later-model classic Minis. Ref: GRC109, GRC130, FC50, GRC0109.

Classic Mini radiator cap, short-stem 13lb for later models (up to 2000). Ref: GRC111, FC55, GRC0111.

15lb radiator cap with rubber seal under the cap to ensure an airtight fit. Ref: GRC207.

15lb late classic Mini model radiator cap with the short insert. Ref: GRC110, GRC0110, GRC1110, FC53.

This 7lb early radiator cap is longer than the later, shorter caps. Ref: GRC101, GRC0101, FC41A, MRC41A.

Shorter-length classic Mini radiator cap with a 7lb. pressure rating. Ref: GRC102, FC43A, MRC43A, GRC0112.

Flat radiator cap, typically used with a pressurized expansion tank. Made in England. Ref: GRC201, GRC0201, FC57, MRC57.

Bracket for converting early classic Mini (two-piece) lower radiator housing to Cooper/S spec.

This is the bolt that goes through ARP1073 spacer on lower radiator mount on classic Minis from 1974 with a one piece cowl. Ref: 12G4270.

Drain tap to fit very early radiators that have a plug in the bottom tank. Can be professionally installed by a radiator shop into a newer radiator

Push-in fan control switch with seal for SPi (single-point injection) classic Mini radiators. Ref: GVS104, CDU1500, GVS198.

Special screw-in fan control switch at the bottom of C-ARA4443 2-core radiator for 1992-on SPi classic Minis. Ref: C-ARA4445.

Rubber grommet for stepped radiator bolt. Ref: 11G227, 11G0227, CAM4414.

Lower radiator support grommet for 1997-2000 MPi classic Minis, with the radiator mounted in the front. Two (2) required, sold each.

Upper radiator mounting grommet for 1997-2000 MPi classic Minis, with the radiator mounted in the front. Two (2) required, sold each.

Plated wire clamp as used on many British cars up until the 1980s; high-quality reproduction. Ref: CS4020.

Plated wire clamps were used on many British cars up until the 80s. This reproduction clamp is of high quality and will add that final touch to any restoration.

Black silicone radiator hose kit to fit any 1275 classic Mini with heater up to 1989, with the control valve directly on the cylinder head. Ref: C-GRH002BLACK, C-GRH002B.

Blue silicone radiator hose kit to fit any 1275 classic Mini with heater up to 1989, with the control valve directly on the cylinder head. Ref: C-GRH002.

Upper and lower Kevlar reinforced radiator hoses for 1275cc pre-1990 classic Minis. Ref: GRH240KEVLAR, GRH247KEVLAR.

Red silicone radiator hose kit to fit any 1275 classic Mini with heater up to 1989, with the control valve directly on the cylinder head. Ref: C-GRH002RED, C-GRH002R.

Blue silicone radiator hose kit for all MPi classic Minis, and includes top and bottom radiator hoses. Ref: C-GRH006.