Body & Trim

Mk2-on classic Mini wavy grille, designed for bonnets with external finger release. Ref: 8B12507.

Wavy grille for late-model classic Minis with cable bonnet release. Ref: 8B12508.

Large rubber grommet to fit 1'' hole for passage of wires, hoses, pipes etc. The center hole is 7/32''. Ref: 5L23, 5L0023.

General-purpose PVC chassis grommet; 5/16'' outer diameter. Ref: GMT522.

Rubber grommet in boot (trunk) lid to isolate the wires to the license plate lamp. Ref: 3F90, 3F0090.

Rubber grommet to prevent chafe of the tank vent hose where it passes through the boot floor. Ref: RFN403, RFN0403.

Rubber grommet to fit in the bottom of GWW935 washer bottle, and to be used with GWW1192 pump. Ref: BAU2043A.

Metal guide on top of the bonnet crossmember of the front panel; fits all through 1996. Not for MPi models with FPS100340 latch.

Full-length half floor section for the Mk1, Mk2, and Mk3 classic Mini Saloon (sedan). Inner sill included and 4-vent outer sill is welded in place.

Half-floor made for 1990s fuel-injected classic Minis until the end of production. Heritage. Ref: HMP441004, HMP441005, HMP441004/HTG, HMP441005/HTG.

Full-length half floor with inner and outer sills. Ideal panel for extensive rust repair of Mk3 and later (pre-fuel injection) Saloons with 6-vent outer sills. Aftermarket; ships via UPS. Choose right- or left-hand side.

Accurate reproduction classic Mini half-floor body panel, full-length with inner sill only. Ref: FS006L, FS006R.

Aftermarket full-length half floor sections for the long-wheelbase Mk1/Mk2 classic Van, Estate, and Pickup models.

Full-length half floor section for the Mk3-on classic Mini Van, Estate, and Pickup models, with inner sill. Ref: MSP012R, MSP012L, SBO0126, SBO0127.

Classic Mini handbrake grip in glossy burl walnut. Ref: MSA0195.

Door and boot handles as used on classic Mini Saloons from 1966-1969, and on U.K. Van, Estate, and Pickup until the end of production. Ref: 24A2083KIT, 24A2083.

Kit for the early classic Mini Mk1 door handle design; includes door handles plus t-handle boot handle with matching keys. Ref: 24A1140KIT, 24A1140.

Stainless steel headlamp ring, includes retaining screw; no drain holes. Ref: 500929, 500929MS, 54520650.

Premium chrome over stainless steel headlamp bezel. Made in the U.K. by Wipac. Ref: S5435, WIS5435, 500929W, DHF100060.

7'' Lucas-style headlamp mounting ring repair panel piece, ideal for rust repair. Ref: 14A6693.

Original-style body panel that holds the classic Mini Clubman headlamp assembly. Ref: CZH120, CZH121.

Aftermarket body panel that holds the classic Mini Clubman headlamp assembly. Ref: MS56R, MS56L, CZH120, CZH121.

Heel board patch for classic Mini Van and Pickup models.

Vertical panel at the rear of the classic Mini Saloon (sedan) floor section, to which the front of the rear subframe is attached. Ref: 14A8160, MS51, HMP44108.

Complete Heritage heel board panel, as used at the rear of the classic Mini Saloon floor and to which the rear subframe is attached.. Ref: HMP441008, HMP441008/HTG.

Classic Mini Saloon (sedan) half-heel board repair body panels, made by British Motor Heritage. Ref: HMP441006, HMP441007, HMP441006/HTG, HMP441007/HTG.

Chrome, hex head screw for the license plate light used on Mk1 and Mk2 classic Minis. Fits 56790 lamps. Ref: 17H5385.

This thick gasket is treated to prevent water damage. Fits the long section of the hinge on the door. Ref: ALA7844, BMP134, 24A2174.

Specially treated thick gasket to resist water damage. Fits the small part of the door hinge on the hinge panel. Ref: BMP135.

Special thick fiber gasket to seat the door hinges to the body on classic Mini Van and Estate rear doors. Ref: 14A8434, ALA8465.

Small panel at the upper rear of the inner fender. Ref: MS6XR, MS6XL.

The best available panel to repair rust in the leading edge of the door frame and A-panel, or to simplify panel replacement on any Mk1/Mk2 classic Mini sedan to OE specs.

To remove and replace the Mk1-Mk2 external door hinge pin bush, this is the tool you will need. Ref: TOOL15, STL0088.

This bushing, along with pin 37H3044, can be used to repair a sagging original external door hinge. Ref: 37H3043.

Rear door hinge repair kit for all classic Mini Van and Estate models. Includes hinge screw, brass ball, spring, locktab and nut. One (1) kit does one (1) hinge.

This pin can be used to repair a worn original external door hinge.

Hinge panel support and inner fender patch. Repairs the door hinge mounting points and extends 3'' inward to repair rust in the inner fender well. For all classic Minis with roll-up windows. Choose right- or left-hand side; sold each.

Classic Mini Pickup tailgate hinge, can be used on both left- and right-hand sides. Ref: 14A7755.

Reproduction of the straight horn bracket as used on the earlier classic Minis. Mounts to the two small studs on the front panel.

The door hinge panels of Mk1-Mk2 classic Minis are a two-layered arrangement, with this panel on the inside. Ref: MS7R, MS7L, 14A8346, 14A8347.

32'' chrome and rubber inner door window scraper/seal for roll-up window classic Minis; fits either side. Ref: EJU10003, CZH3576, JPC8153.

Left-side Mk3 classic Mini inner fender wing panel with grille slats for the radiator cooling. Ref: ALA6475.

Left-side inner fender panel complete with the inner hinge (''A'') panel and inner bracket, for rust or collision repair. Ref: ALA6279.

As-original inner fender for major accident or rust repair. For Mk3-on classic Minis, but can also be adapted for use on earlier models. Ref: ABD36006, CZH460, CZH3064.

As-original inner fender for major accident or rust repair; for Mk4-on classic Minis with electric fan, approx 1991-1996. Ref: ABD36007, ALA6475.

Metal frame that attaches to left front inner fender to duct air from the radiator through the inner fender. Ref: 14A6498.

Panel on the left inner fender that ducts air from the engine fan through the inner fender; a Heritage product. Ref: 14A6498.

Stamped radiator grille body panel; part of the left inner fender of early classic Mini models.