Body & Trim

Pair (left and right) of fresh air vents that pass through the dashboard, and used on 1976 and later classic Minis. Ref: JPC8632.

Front bumper mount lip for all classic Minis from 1959-2000, except for Mini Clubman. Welds to nose panel; no license plate brackets

Genuine Heritage full-length inner wing (fender) for the left-hand side of Mk1-Mk2 classic Minis. Ref: 14A7901, 14A7901/HTG, 14A8389.

Genuine Heritage full-length inner wing (fender) for the right-hand side of Mk1-Mk2 classic Minis. Ref: 14A7900, 14A7900/HTG, 14A8388.

End-only repair piece for the classic Mini front nose body panel; choose right- or left-hand side. Ref: MS5L, MS5R.

Heritage-version classic Mini front body panel with rubber mounts, as used 1976-1996.

Front body panel for the 1990-1996 classic Mini; Heritage version for the best fit and finish.

Reproduction front panel as used on the front-radiator 1997-2000 MPi classic Mini. Ref: SBO0655, ASJ360070, ASJ360070MS.

Heritage front panel for 1997-on classic Minis with front-mounted radiator. Ref: ASJ360070.

Reproduction front body panel, fits all classic Minis to 1976. Ref: MS4E, ALA6612, 14A8308, ALA8619, SBO0326.

Heritage-made front panel, correct for all classic Minis to 1976, when additional mounts were added. Ref: 14A8308, 14A8308/HTG.

Starting in May 1976, classic Minis had a slightly modified front panel to accept the new isolating mounts that were part of the ''facelift'' modernizations. Ref: MS4L, ALA8619.

Foam gasket to fit tail lamp lenses with integral clear reverse lenses, except for Altissimo-made units. Fits both left and right sides. Ref: XFH100460.

Foam rubber lens seating gasket as used on Mk2 tail lamp. Ref: 37H6778.

The Mk1 tail lamps use this sponge rubber gasket between the lamp base and the body. Ref: 54571330, 57H5399, 47H5361.

The classic Mini Van, Estate (Wagon) and Traveller (Woody) tail lamps use this sponge rubber gasket between the lamp base and the body. Ref: 57H5167.

This sponge rubber gasket fits between the lens and the tail lamp assembly on the Mk1 classic Mini. Ref: 54570450, 57H5399.

Smiths water temperature gauge; 30-110° Celsius with 6ft capillary mechanical fittings. Ref: SIB422, SIB422MG.

Genuine Smiths electric water temperature gauge; 52mm, reads from 50-140° Celcius. Ref: 13H4461, 13H4461MG.

Original-spec Smiths electrical water temperature gauge as used in Mk2-on classic Minis. Ref: 13H4460, 13H4460MG.

Smiths electrical water temp gauge as used in Mk2-on classic Minis. As original, but with popular magnolia face. Ref: 13H4460MG.

Front grab handle for the classic Mini Moke, fits right or left side. Ref: ALA7328.

Rear grab handle for the classic Mini Moke, fits right or left side. Ref: ALA7329.

Pair of natural aluminum grille buttons for quick removal of the classic Mini grille for oil changes and servicing. Ref: MS100, LMAAC06.

A pair of black grille buttons for quick removal of the classic Mini grille for oil changes and servicing. A traditional and useful Mini accessory!

A pair of chrome grille buttons for quick removal of the classic Mini grille for oil changes and servicing. Ref: MS99.

Weld-in grille insert repair panel for the classic Mini Van and Pickup. Ref: 14A6480G, 14A6480, SBO0040.

The front panel normally has a ''stiffener'' or support bracket spanning the grille opening to provide reinforcement.

Removable grille panel as used on Australian and Portugese classic Mini Mokes. Ref: HEY0880, HEY880.

Diagonally mounted sheet metal brace to reinforce the grille opening on Cooper S models with oil cooler.

Small clip made in stainless that retains the Mk1 classic Mini grille extension whiskers. Ref: ADA3583.

This extension for the Mk1 classic Mini grill surround is commonly called the ''whisker'' and is often missing. Ref: 14A7782, 14A7783.

Mk1 classic Mini ''mustache'' grille surround, can also be used on Mk2 and later front panels. Ref: 14A7781RETRO, 14A7781.

Grille surround trim as introduced with the Mk2 classic Mini (1968) until the end of production. Ref: ALA6508, ALA6509.

Top grille moulding that attaches to the lip on the bonnets of classic Minis Mk2-on (1968-on). Ref: ALA6559, DEB100040.

Excellent reproduction of the grille originally fitted to Mk1 classic Austin Mini Cooper and classic Mini Cooper S models. Ref: 24A198.

Used originally on non-Cooper Austin Mk1 models, this distinctive grille has a ''woven wicker'' look. Ref: 14A7299.

The Mk1 Morris Cooper and S models had this upscale grille style, featuring polished slats mounted at a downward angle. Ref: 24A2158.

Lamp-carrying grille in the style of Mk1 classic Mini Morris Cooper; if you want to fit flush-mount driving lamps into your grille, this is the one to use. Ref: 8B12506, 24A2158L.

For those who want to retrofit a Mk1-style grille to a later classic Mini, this Morris Cooper grille is ideal. No access hole for bonnet release.

A high-quality reproduction classic Mini grille with eleven (11) slats. Has finger hole for bonnet release. Ref: ALA6654, ALA6654MS.

Black version of the straight-slat Mk2-on grille, as used on many of the special edition Minis, but can be fitted to any 1968-2000 Mini. Ref: CZH4015, CZH4015MS.

Attractive reproduction grille that can be used as a replacement or upgrade grille for many classic Mini models. Ref: ALA6668, DHB10151MMM.

This grille is the same appearance as ALA6668 Cooper grille, but has no finger access hole for bonnet release. Top slat is full width for use with internal cable bonnet

This grille features stainless slats instead of polished aluminum, with an opening for the external bonnet release.

Upgraded grille in the style of the ALA6668 Cooper grille but with stainless slats; for internal bonnet release only. Ref: 8B12503, SBO0709.

An upgraded version of the ALA6668 Cooper grille, featuring highly-polished stainless steel slats. Ref: 8B12505, SBO707.

Grille that allows the addition of driving or fog lamps to the classic Mini. Ref: 8B12502, ALA6668L, SBO0708.