Body & Trim

These ''GB'' badge letters are made in stainless steel to the correct bend and shape to fit the boot lid on classic Minis.

Boot lid badge for the classic Mini 1000, with the Leyland logo. Ref: CZH3815, CZH1357, CZH4152.

Chrome, black and gold metal boot badge, originally fitted the 1984 Special Edition classic Mini. Ref: CZH4016.

Chrome ''Austin'' script boot badge as fitted to Mk1 Austin Mini, Austin Cooper and Austin Cooper S models. Ref: 14A6802.

Self-adhesive boot badge as used on classic Minis from 1992-on. Chrome finish with contrasting black edges.

Black and silver boot (trunk) badge as fitted to Clubman-bodied 1275GT classic Mini. Ref: CZH1269.

Boot badge, outline script of the word ''Cooper'' in chrome-plated metal. Ref: 24A23, BAD24A23, 24A0023.

This is the script ''S'' for classic Mini Cooper S models; not symmetrically mounted once installed. Ref: 24A1402.

Classic ''Mini-Minor'' Mk1 boot (trunk) badge, in chrome block letters. Ref: ADA3730.

Boot/trunk badge, outline script of the word ''Seven'' in chrome-plated metal. As used on the first Austin 850s. Ref: 14A6853.

Block letter ''Morris Cooper'' boot badge for Mk1 classic Minis. Ref: 24A24, 24A0024.

Boot lid badge for the Mk3 classic Mini 1000. Ref: CZH1357.

Boot lid badge for the Mk3 classic Mini Cooper S. Black on chrome backing.

Mk2 Morris Cooper boot badge plastic insert. Ref: ALA6537, ALA6542.

One of two side brackets used to support the boot board; may need replacing due to abuse or rear end accidents. Ref: 14A9781.

Genuine Heritage boot floor complete stamping including the rear seat base; does not include battery box. Ref: ALA5513, ALA5513/HTG.

Handy reproduction panel extends forward from the classic Mini Saloon (sedan) boot opening to cover the area most frequently affected by rust or accident damage

Repair panel for the flat section of the classic Mini boot floor adjacent to the battery box. Ref: MS24L MS24R, SBO0640, SBO0641.

This genuine British Motor Heritage body panel goes from seam to seam, and from bumper to trunk opening.

This simple cable, used on each side of the classic Mini Saloon (sedan) boot/trunk lid, keeps it from dropping too low when open. Ref: 14A6740.

Rubber seal that fits the later classic Mini boot/trunk handle introduced in 1972. Ref: CZH1747.

Locking boot t-handle, chrome plated, for classic Mini Mk1, Mk2, Van, and Estate (excl. Woody). Ref: 14A7194.

Classic Mini boot (trunk) handle as introduced in 1972 and used until the end of production. Ref: CZH1725, JRC2844.

Thick paper gasket for the lower section of the boot (trunk) lid hinge. Ref: 24A2176, BMP402.

Thick paper gasket for the top section of the boot lid hinge. Ref: 24A2175, BMP401.

Reproduction panel that economically replaces the original classic Mini boot hinge panel from hinge to hinge.

Pair of classic Mini boot lid hinges; mounting hardware included. Fits all years classic Mini, 1959-2000. Ref: BMB36002/3, BMB36002, BMB36003, 8B12602.

Nice reproduction classic Mini boot (trunk) lid hinges in chrome for a fresh look. Ref: 8B12601, SPD0002, BMB3600C.

Original-style metal lamp housing for boot (trunk) lids beginning with Mk3 classic Mini models. Ref: 13H6900, 13H6900P.

Boot lid seal to fit on the body instead of on the boot lid, as used 1989-on. Ref: CKE10018.

Rubber seal that mounts to the boot lid using twenty-six (26) spring clips (14A6585) that press into holes in the inner frame of the lid. Ref: 14A6584, 14A6584-MS.

Lightweight fiberglass boot lid skin (only); ready to sand and paint. For Mk1 and Mk2 classic Minis with the hinged number plate

Lightweight fiberglass boot lid skin (only), ready to sand and paint. For Mk3 and later classic Minis.

Steel outer boot lid skin only, for repairing the existing boot lids of classic Minis from 1970-on. Heritage.

The classic Mini Mk1-2 boot (trunk) lid is identified by a rectangular indentation to accept the long, hinged license mounting plate. Ref: 28G110, 28G110/HTG, 28G0110.

Boot/trunk lid made in the exterior shape as used on the late Mk1 and Mk2 classic Minis, with full interior metal skin panel to finish off the loading area. Ref: 8G9270MS, 8G9270.

Classic Mini Mk1-2 boot lid, as updated in 1970 to the larger license recess of the Mk3 design. Ref: BMP339, BMP339/HTG, BMP0339.

Reproduction boot lid made in the Mk3-on exterior shape, but has a full interior metal skin panel to finish off the loading area. Ref: MS19, SBO0677.

The final design of boot lid for the Mk4 classic Mini; features large license plate recess as used on Mk3-on models. Heritage. Ref: BMD36001, BMD36001/HTG.

Rubber gasket to seal the door handle base (escutcheon) from water entry; can also be used on selected boot handles. Ref: ADA3817.

Genuine Heritage bracket for boot floor to the inner wheel arch. Choose right- or left-hand side.

Small bracket to mount the large number plate mount on the rear valance on the Van and Estate. Two (2) required.

Aftermarket bracket to fit rear inner wheel arch to floor in the classic Mini Saloon (sedan) boot. Choose right- or left-hand side.

Brackets that bolt to the lower dash rail and locate the switch panel within ALA6621 lower dash pad. Ref: ALA6652, ALA6653.

1/2'' diameter rubber buffer used to cushion the boot board in the trunk of a classic Mini Cooper S, and also the folding rear seat on the Traveller. Sold each.

Bullet-shaped rubber buffer to stop the rear classic Mini Saloon (sedan) license plate bracket from bumping the body work. Ref: 14A7625.

Nickle-sized rubber buffer that fits on the bonnet slam section of the front panel. Stops the bonnet from damaging the painted surfaces and helps to prevent rattles. Ref: 14G6856.

Small based bulb, most commonly used in Mk1 and Mk2 license plate lights and side marker lights on Canadian Minis. Ref: GLB989, LLB989, 989.