Boot/Trunk Lid Accessories

Boot badge, outline script of the word ''Cooper'' in chrome-plated metal. Ref: 24A23, BAD24A23, 24A0023.

This is the script ''S'' for classic Mini Cooper S models; not symmetrically mounted once installed. Ref: 24A1402.

''Mini'' script boot badge as used on Mk1 MK2 classic Minis. Ref: 24A997, 24A0997.

Chrome ''Austin'' script boot badge as fitted to Mk1 Austin Mini, Austin Cooper and Austin Cooper S models. Ref: 14A6802.

Classic ''Mini-Minor'' Mk1 boot (trunk) badge, in chrome block letters. Ref: ADA3730.

Boot lid badge for the Mk3 classic Mini Cooper S. Black on chrome backing.

Chrome, block letter ''1000'' badge, as used on the Austin and Morris Mk2 Cooper. Ref: ALA6695.

Classic Mini boot (trunk) handle as introduced in 1972 and used until the end of production. Ref: CZH1725, JRC2844.

Locking boot t-handle, chrome plated, for classic Mini Mk1, Mk2, Van, and Estate (excl. Woody). Ref: 14A7194.

Kit for the early classic Mini Mk1 door handle design; includes door handles plus t-handle boot handle with matching keys. Ref: 24A1140KIT, 24A1140.

Door and boot handles as used on classic Mini Saloons from 1966-1969, and on U.K. Van, Estate, and Pickup until the end of production. Ref: 24A2083KIT, 24A2083.

Set includes both roll-up window door exterior handles and boot handle with matching locks/keys, for Mk3-on classic Minis. Ref: CZH1785.

Screw used to hold together the two halves of the disc shields on all classic Mini front discs, as well as retaining the boot lid cable to the bootlid, and used on various door handles and door remote link.

Thick paper gasket for the top section of the boot lid hinge. Ref: 24A2175, BMP401.

Thick paper gasket for the lower section of the boot (trunk) lid hinge. Ref: 24A2176, BMP402.

Large Pozidrive screw to attach the classic Mini boot/trunk lid hinges to the body. Ref: SG604051.

Nice reproduction classic Mini boot (trunk) lid hinges in chrome for a fresh look. Ref: 8B12601, SPD0002, BMB3600C.

Pair of classic Mini boot lid hinges; mounting hardware included. Fits all years classic Mini, 1959-2000. Ref: BMB36002/3, BMB36002, BMB36003, 8B12602.

Tailgate stays for the classic Mini Pickup; these support the tailgate when in the opened position and prevent it from opening too far. Ref: 14A7761, 14A7762.

Classic Mini Pickup tailgate hinge, can be used on both left- and right-hand sides. Ref: 14A7755.

Bullet-shaped rubber buffer to stop the rear classic Mini Saloon (sedan) license plate bracket from bumping the body work. Ref: 14A7625.

Rubber seal that mounts to the boot lid using twenty-six (26) spring clips (14A6585) that press into holes in the inner frame of the lid. Ref: 14A6584, 14A6584-MS.

Boot lid seal to fit on the body instead of on the boot lid, as used 1989-on. Ref: CKE10018.

Clip to retain the rubber seal on the classic Mini boot lid (to 1989) or the rear doors of the classic Mini Traveller and Van. Ref: 14A6585, 14A6585KIT.

Rubber seal that fits the later classic Mini boot/trunk handle introduced in 1972. Ref: CZH1747.

Rubber seating gasket for under the metal license plate lamp housing as used on Mk3 and later classic Minis. Ref: 13H6010, 54571498.

Dress up the boot lid of your Mk3-or-later classic Mini with this chrome light housing. Ref: 13H6900C, 8B12501, 8B12501METAL.

Bulb holder assembly for rear license plate light housing. Ref: PRC1230, PRC1230A, 54904, LPB790.

Original-style metal lamp housing for boot (trunk) lids beginning with Mk3 classic Mini models. Ref: 13H6900, 13H6900P.

Screw to hold the 14A6466 and 14A6467 license plate hinges to the Mk1 and Mk2 classic Mini boot lid. Sold each, six (6) required.

Chrome, hex head screw for the license plate light used on Mk1 and Mk2 classic Minis. Fits 56790 lamps. Ref: 17H5385.

FS key blank, as used on most door and boot handles, as well as dash-mounted ignition switches. Ref: 17H2475, KEY1.

Center bracket for boot board, includes rubber catch for boot board clip 11.41.13.05 (not included). Normally this bracket is riveted into place.

Boot board clip completes bracket set CK948. Mounts to bottom of boot board.

Carpeted boot board for twin-tank classic Minis 1962-1980

If your classic Mini does not have a boot board covering the spare tire, you don't know how handy it is to have!

Boot board bracket set; for original left-hand tank, 9.0 US gallons, spare tire up to 165 size.

Carpeted boot board for single-tank classic Minis to 1980

Carpeted boot board that, with the boot board bracket kit, will fit any Classic Mini Saloon with the single 7.5 gallon tank. Ref: CK953.

Kit suitable for the fitting of boot boards for classic Minis with single fuel tanks built after 1980.

Boot board recovering carpet kit with matching vinyl edging for single-tank classic Minis to 1980.

Boot board recovering carpet kit with matching vinyl edging for twin-tank classic Minis 1962-1980

Set of eight snap assemblies used to hold down the carpet to the floor of the classic Mini. Ref: CARPET01, SST0054.

Black boot board recovering carpet kit with matching vinyl edging for twin-tank classic Minis 1962-1980. Ref: CK967, CK967A.

Fiberboard liner in black with hardware kit to cover the open frame of the classic Mini boot lid

This simple cable, used on each side of the classic Mini Saloon (sedan) boot/trunk lid, keeps it from dropping too low when open. Ref: 14A6740.