Rear Suspension

Small wet-suspension rebound buffer limits upward movement of the radius arm; two required. Ref: 21A1517.

Kit contains two (2) rubber bushings with metal collars and retainer nuts. Ref: C2542.

Replacement rear wheel bearing hub for all classic Mini and variants, 1959-2000. Bare hub, no studs or wheel bearings.

The earliest Minis had ball bearing rear wheel hubs, but taper rollers were introduced with the Cooper S model. Ref: GHK1548MS, GHK1548, GHK1548E.

Genuine Timken tapered roller rear wheel bearing, originally upgraded for the MPi classic Mini, but suitable for any 1959-2000 classic Mini. Ref: GHK1805, GHK1548, GHK1548TIMKEN, RFM001804EVA.

U.K.-made Safety Devices bolt-in roll cage, with removable diagonal bar; for right-hand drive classic Minis. Ref: C-STR49SD.

Reproduction rubber cone/spring for use on dry-suspension classic Minis. Fits front or rear. Ref: FAM3968, FAM3968E.

Competition-quality rubber suspension springs with a special shape and material. Ref: C-STR688.

Uprated rubber cone spring that will stiffen up the suspension while lowering it at the same time. Fits front or rear. Ref: C-STR687.

Short Pozidrive head screw used to retain the front drum and standard rear drum to the drive flange or rear hub. Ref: CMZ407, HDWS288, DS1X100.

Rear hub seal as included with all bearing kits; fits all classic Mini rear hubs. Ref: GHS102, GHS227, GHS142, GHS0102.

Pressurized KYB self-adjusting slimline shock absorbers for standard ride-height road classic Minis. Ref: 552018, 552019, GSA388A, GSA389A.

Affordable, quality shocks to reduce your classic Mini maintenance budget; an ideal upgrade for road cars! Ref: 442001, 442002, GSA71541, GSA71542, GSA388-KYB, GSA389-KYB.

Special gas-filled SPAX rear unit for the rear of long-wheelbase classic Mini models, giving more length and travel. Ref: GM3, C-STR308, 158-M3.

Thick, square section circlip that fits in a groove machined in the drive shaft to stop inward movement of the CV joint. Ref: 2A7352, 17H8597.

As-original rear aluminum suspension strut as fitted to the classic Mini Van, Estate and Pickup plus all saloons from 1984 with 12'' wheels. Ref: 21A1684.

Felt washer used on either side of the lower eyelet on the Hydrolastic rear suspension helper spring.

Thick steel washer, which retains the bearings inside the rear hubs.

Longer-than-standard wheel stud often used with non-standard wheels or when spacers are used. Ref: 21A2064L, ATA7085.

Standard-length stud for rear drums with built in .75'' spacer; threaded length .75''. Ref: 21A1278, RLJ10001

Wheel stud version with long threaded length to accomodate longer sleeve nuts used on wheels with thick centers. Ref: 21A1278LT, ENJO-1039.

The longest normal stud in standard 3/8'' diameter for rear suspension; stud is 78mm long, with 27mm threaded. Ref: ENJO-1040.