Carburetors

New float lid base for the bottom HIF38, HIF44 and HIF6 carbs.

Float lid gasket for all SU HS side-float carburetors; fits SU HS2, HS4, and HS6 carbs. Ref: AUC8459, GSU0550.

High-flow needle and seat valves; diameter is .096'' compared to .070'' for standard applications. For HS series carbs including HS2 & HS4

Viton-tipped fuel control needle and seat asembly for HIF38, HIF44, and some HIF4 carbs. Ref: VZX1099, WZX1099, WZX1099A.

Adjustable float for HS2 and HS4 SU carburetors. Ref: WZX1304, WZX1300.

Complete basic gasket set for HIF carbs with integrated float chamber. Ref: WZX1505, WZX1505A, GSU0500.

Gasket on the air cleaner elbow side of the carb; bolts between the carb and elbow. Ref: 12H862, 12H862B, 12H0862, ACA8014.

The paper gasket that goes between the carb and the cleaner elbow or pancake filter on HS4 carbs.

HS4 carb to manifold gasket, two-bolt. Ref: AEC2083.

Gasket between carb and air cleaner alloy elbow. Ref: 12H4271, GUG705576GM.

Mounting gasket for HIF6 and HIF44 1.75'' carb. Ref: 88G429, 88G0429, GUG705561GM.

Gasket for 1.25'' SU carb flange or spacer. Ref: 1G2624B, 1G2624, GUG705831GM.

Grose Jet float valve for all side-float SU carbs. Ref: SIE0045.

Small metal guide that retains the spring-loaded or ''swinging'' needle on SU HS or HIF carburetors. Ref: AUD4288.

Complete kit to replace cracked or missing heat shields on twin HS2 setup. Black powder-paint finished. Includes interconnecting bridge, two shields and springs. Ref: MSSK008, SIE0041.

A complete heat shield kit in highly-polished stainless for twin HS2s. Includes two shields, bridge, and springs. Ref: MSSK1005, SIE0041SS.

Heat shield kit in black for twin HS4 (1.5'') carb set.

Heat shield kit in stainless for twin HS4 (1.5'') carburetor set. Ref: MSSK1006, SIE0122SS.

Stainless heat shield/linkage plate for HIF carburetors; will never rust! Ref: 3A0035, FOR021, CAM4942.

Pivot pin for float in HIF carbs; includes washer. Ref: WZX1258, WZX1450.

The HIF44 / HIF6 1.75'' SU carburetor has generally become the carb of choice on 1275cc and larger engines. Ref: FZX3006, FZX1280, FZX1313, FZX1462.

Custom rebuilt kit includes everything you need to convert to a single 1.75'' SU carburetor from twin carbs.

Knurled hinge pin for float in HS series carb fuel chamber. Ref: AUC1152.

All-new SU HS2 (1.25'') single carb to replace the original used on 850 and 998 classic Minis. Ref: AUD449, AUD13, AUC912, AUD9098A.

New SU HS4 (1.5'') single carb to replace original used at various times on late 850 and 998, 1300cc classic Minis and Austin America. Ref: FZX3003, FZX1240, AUD611, SIE0025.

Half-height 3/8'' SAE nut for use on rear brake hoses, bonnet pin, and twin HS2 intake manifolds. Ref: NT606041.

Special large-bore jet for racing applications, with .100'' bore instead of conventional .090'' bore to allow richer mixture.

Special large-bore jet for racing applications. Has .100'' bore instead of conventional .090'' bore to allow richer mixture. Fits rear or right-hand carb.

Jet bearing kit for ''fixed needle''-type SU HS carburetors, including HS2 and HS4. Ref: WZX1341.

Jet bearing kit for ''swinging needle''-type SU HS Carburetors, including HS2 and HS4

Linkage set for converting a later Waxstat-type jet HS4 to the earlier, simpler plastic fixed jet. Ref: BFS701SUL.

Jet locking spring for SU HS2 and HS4 carburetors. Serves as a tension spring for the jet bearing assembly. Sold each.

Jet tube assembly for HS series carbs with plastic jet; fits the front carb (radiator end) on twin carb installations. Ref: GSU423, AUD9141A, AUD9141.

Jet tube assembly for single HIF6 carburetor.100'' jet. Ref: WZX1453, WZX1453A, GSU0402.

Jet assembly for single-carb application SU HS2, such as 850 classic Mini and classic Mini Moke. Ref: AUD9098, AUD9098A.

Jet tube assembly for HS series carbs with plastic jet. Ref: AUD9142A, AUD9142.

Replacement for the troublesome seal in the bottom of the float bowl on HS (side float) carburetors. Ref: AUD2194.

Universal linkage kit for twin HS2 or HS4 SU carburetors. Ref: MSSK9, MSSK009, SIE0052.

Linkage kit for twin HS2 carbs on classic Mini, Sprite or Midget. Ref: WZX872.

Genuine SU kit with everything normally needed to rebuild a pair of HS4s, as fitted to performance classic Minis. Ref: CRK254.

Float chamber fuel metering valve for HS series side-float SU carberetors. Ref: VZX1100, WZX1100A.

Needle Set Screw, sliding chamber

Very small spring that fits on the ''top hat'' of the spring-loaded carb needle. Ref: AUD3306.

Phenolic spacer for HIF6/HIF44 1.75'' carb. Approximately .50'' thick. Ref: 12B561, GUG705602GM, 12B0561B.

Spring for idle adjust screw on SU HS carburetors.

Aluminum cast stub stack for SU HS4 and HIF4/38 carburetors. Ref: SS51, SIE0313.

This is the proper stud to use in the aluminum intake manifold for twn HS2 carbs. 3/8'', fine thread on one end, course on the other. Can also be use as the stud for spin-on filter housing.

Float extension kit for vintage race Classic Minis using period-correct SU H4 carburetors.