Products 49-68 of 68
Show
Item #: CAM4133 -
Stamped oil gallery plugs to fit the .50'' bore holes of late classic Minis. Ref: CAM4133, 12G3503.
Item #: LUF10005 -
This improved Viton seal can be fitted to any classic Mini, MG1100 and manual Austin America, and helps prevent crankshaft rear main seal leaks. Ref: LUF10005.
Item #: 22A0784 -
Rear main oil seal, for classic Mini and Austin America models with automatic transmission only
Price: $8.50
View
11/8/2017 12:00:00 AM
8.9500
Pending Warehouse Check
Item #: 13H2934 -
OE-spec crankshaft rear seal that presses into the flywheel housing; suitable for competition use. Ref: 13H2934, 13H2934MS, NA584.
Item #: 13H2934E -
Less expensive version of the rear main seal manufactured by well-known seal manufacturer NAK. Does not have the scroll markings.
Item #: 88G0561 -
All A-series and A+ engines used this front seal until about 1990. Ref: 88G561, NA473, 88G0561.
Price: $11.50
View
3/18/2020 2:00:00 AM
8.95
Pending Warehouse Check
Item #: LUF10006 -
Improved timing cover seal, featuring a double lit and a scroll to swirl any oil back toward the seal. Ref: LUF10006.
Price: $86.95
View
6/5/2017 2:00:00 AM
65.95
Pending Warehouse Check
Item #: CE12 -
Kit allows safe replacement of a leaky rear main crankshaft oil seal without the time consuming removal of the flywheel housing. Ref: CE12, STL0012.
Item #: AEC0671 -
Flat rubber seal to fit A-series dipsticks. These dipsticks are flat on the underside where they meet the tube. Ref: AEC671, AEC0671.
Item #: GHS0101 -
Outer wheel bearing grease seal on the front swivel hub of both drum and disc brake models. Ref: GHS101, BTA9014.
Item #: GEG502 -
Set of paper gaskets to go between the block and gearbox on all classic Minis 1959-1995. Ref: GEG502, GUG3007SG, HC031.
Price: $11.50
View
7/15/2020 12:00:00 AM
6.9500
Pending Warehouse Check
Item #: TRK100290EVA -
Thin paper gasket that goes between the block lower flange and the top flange of the gearbox case; classic Mini MPi engine blocks only. Ref: TRK100290EVA, GUG703049SG.
Item #: 12A1177 -
Special cupped washer to positively locate the rubber seal on the tappet chest cover bolt. Ref: 12A1177.
Item #: 12A1176 -
The small seal on the tappet covers of early A-series engines is often overlooked and becomes a source for leaks. Ref: 12A1176.
Price: $2.00
View
QTYDISCOUNT
Pending Warehouse Check
Item #: 12A1358 -
Economical reproduction valve cover grommet (oil seal). Should be replaced when the valve cover is off. Ref: 12A1358.
Price: $1.68
View
QTYDISCOUNT
Pending Warehouse Check
Item #: 12A1358HD -
Long-lasting neoprene version of the seal under the valve cover retaining bolt. Ref: 12A1358, 12A1358HD.
Item #: ADU4905 -
Inverted-cup oil seal with a spring retainer to keep it in place; fits guides that have a machined groove to accept the seal. Ref: ADU4905.
Price: $0.95
View
6/11/2019 12:00:00 AM
0.8000
Pending Warehouse Check
Item #: 2A0879 -
All 850-1098cc engines used these small o-rings on the valve stem for guide oil control. Ref: 2A879, GUG705922GM, 2A0879.
Item #: LJQ101160 -
Cup oil seal with spring retainer to keep it in place; as fitted to the MPi classic Mini. Ref: LJQ101160.
Item #: 7H1758 -
Felt washer for use in the oil system.
Questions? Email parts@7ent.com, or call
(800) 992-7007 (U.S. only) or (530) 886-0771