Door & Window Handles, Cranks, & Locks

Rubber seal that fits the later classic Mini boot/trunk handle introduced in 1972. Ref: CZH1747.

Locking boot t-handle, chrome plated, for classic Mini Mk1, Mk2, Van, and Estate (excl. Woody). Ref: 14A7194.

Classic Mini boot (trunk) handle as introduced in 1972 and used until the end of production. Ref: CZH1725, JRC2844.

Rubber gasket to seal the door handle base (escutcheon) from water entry; can also be used on selected boot handles. Ref: ADA3817.

Small e-clip to connect the door opening remote control rod plus the lock control mechanism on roll-up window doors.

Set includes both roll-up window door exterior handles and boot handle with matching locks/keys, for Mk3-on classic Minis. Ref: CZH1785.

Set of three matching lock barrels for both door handles and the boot handle on any Mk3-on (roll-up) window car. Includes two keys.

Small gasket for leading end of exterior door handle of roll-up window cars. Ref: CZH1729, ALA5795.

Gasket between rear of door handle and exterior door skin. Ref: ALA5795.

Protect your paint job from scratches make by your rings and fingernails. Polished stainless door shields fit in the dish behind the door handle.

Interior door handle for Mk1-2 classic Minis; replaces cable opener for early models and provides an easy-to-use lever for door release. Ref: GLZ119, GLZ119A.

Main door lock assembly for classic Minis with roll-up windows only. Ref: CZH3528, CZH3529.

A replacement Mk3-on classic Mini door lever in polished metal to upgrade the interior from the standard plastic version. Ref: G283.

If you need to replace the locks in an original Mk1-Mk2 classic Mini, this set includes a pair of barrels and keys.

Rectangular black plastic finisher that surrounds the door lock toggle. Ref: CZH611, CZH611PA.

Lock control with link for roll-up window doors, as fitted to 1993-on classic Minis; can retrofit all roll-up window doors on U.K. Minis.

Pair of interior door opening handles in burl walnut. Ref: MSA0193.

Pair of door opening links for roll-up window Innocenti classic Mini. Used condition.

Plastic door pull as fitted to early roll-up window cars. Includes chrome metal brackets at each end. Sold as an assembly, two required per car.

High-quality, polished aluminum alloy door pull handles; much stronger than the original plastic ones. Ref: MSA1132.

Used striker plate assembly with metal loop to engage the door lock assembly; includes face plate. Ref: U-CZH627, CZH627, CZH0627, CZH0627-USED.

Striker plate with metal loop to engage the door lock assembly; fits either side. Ref: CZH627, CZH0627.

High-quality polished aluminum window crank set for Mk3-on classic Minis with roll-up windows (excluding 1997-on MPi's). Ref: MSA1130.

Door window crank handle with a spring-loaded winder knob, as fitted 1983-on. Ref: YXX3199PA, YXX3199LNF.

This chrome-plated metal handle fits the hex drive of the window regulator. Rubber knob. A nice enhancement to any interior. Sold each.

Plastic door window crank handle for classic MInis up to 1982, with large hex drive to attach to the window regulator. Ref: CZA7109.

Window crank with square post for Riley Elf, MG1100 and Austin America; also fits Australian Minis with roll-up windows. Ref: 34G2528, ADA5667.

Pair of interior door window crank (winder) handles in burl walnut. Ref: MSA0194.

This is the chrome base plate of the left-hand exterior handle; fits classic Mini Mk1-2 Saloons (sedans), and sliding-window Vans and Pickups through end of production

This is the chrome base plate of the right-hand exterior handle; fits classic Mk1-2 Saloons, and sliding-window Vans and Pickups through end of production

Flanged screw for classic Mini door window crank CZA7109.

Front grab handle for the classic Mini Moke, fits right or left side. Ref: ALA7328.

Rear grab handle for the classic Mini Moke, fits right or left side. Ref: ALA7329.

Door and boot handles as used on classic Mini Saloons from 1966-1969, and on U.K. Van, Estate, and Pickup until the end of production. Ref: 24A2083KIT, 24A2083.

Kit for the early classic Mini Mk1 door handle design; includes door handles plus t-handle boot handle with matching keys. Ref: 24A1140KIT, 24A1140.

Complete set of replacement all-chrome metal interior hardware for roll-up window U.K. Mk3 doors. Ref: MSA507.

Black plastic door handle with chrome bezel. Fits all roll-up window doors on UK classic Minis up to 1996. Ref: 34G2529, JPC8387PA.

Single locking exterior door handle with keys, bezel not included.

Slim exterior locking door handle for classic Minis to 1966; escutcheon sold seperately

This chrome button on the door was added to make the door handles safer. Ref: 24A1834.

Screw used to hold together the two halves of the disc shields on all classic Mini front discs, as well as retaining the boot lid cable to the bootlid, and used on various door handles and door remote link.

British Pozidrive screw for the door latch assembly on roll-up window classic Minis. Ref: SF604101.

This screw fits the G283 door lever/handle, as well as the GAM0258/9 mirrors and SAC0079 and SAC0080 bonnet straps. Ref: CMZ312, CMZ0312.

Special flanged screw to retain the updated door handle, as introduced in 1983. Ref: ADU8081, YXX3199PA.

This chrome plastic bezel replaces the standard one to brighten up the interior; fits all Mk3 and later classic Minis. Ref: G281, CZH701.

Black plastic collar between the handle and door panel upholstery; fits Mk3-on classic Minis. Sold each.

Small plastic plug to conceal the screw in late Mini window cranks. Ref: YXX3200PA, YXX3200LN.

Round fiber washer that fits under the chrome window lock boss on the outside of the glass. Ref: 14A7065, 14A7065B.